Food and Drug Administration (FDA) Disclosure:

The statements in this forum have not been evaluated by the Food and Drug Administration and are generated by non-professional writers. Any products described are not intended to diagnose, treat, cure, or prevent any disease.

Website Disclosure:

This forum contains general information about diet, health and nutrition. The information is not advice and is not a substitute for advice from a healthcare professional.

reclaiming?

Discussion in 'Seasoned Marijuana Users' started by maxb420, Feb 6, 2014.

  1. #1 maxb420, Feb 6, 2014
    what is the best way for me to get this out, 
     
    [​IMG]
     
    [​IMG]

     
  2. #2 Heroic Dose, Feb 6, 2014
    wash it with iso like you would any other dirty piece.

    the reclaim should be nearly as potent as the initial oil
     
  3. #3 ObamarcusThaXII, Feb 7, 2014
    Rubbing alcohol and salt. Salt acts as the abrasive and alcohol removes it. Then flush with water. You can use that and/or dishsoap with a lil' elbow grease
     
  4. #4 kush70, Feb 7, 2014
    if you want to smoke it when you get it out i would not recommend using salt
     
     - just 91%  - 100 % iso
     
  5. #5 solarhitz, Feb 8, 2014
    you can use Acetone or a 91%+ Isopropyl Alcohol. Just shake your rig with the chemical in it and use a small tool to scrape your oil off the walls of the glass if you can get one down there. After that, take the dirty solution and dump it into a pan and set it outside in the sun to evaporate. what you'll have left in the pan will be like a QWISO with oil left behind instead of hash. 
     

Share This Page