Problem with amp

Discussion in 'Planes, Trains & Automobiles' started by daltonmc, Nov 15, 2011.

  1. #1 daltonmc, Nov 15, 2011
    I've got a class D 400 watt amp. Basically, the amp won't get power. Randomly, it will turn on for like 10 seconds and then turn off. The protect mode isn't coming on or anything. The ground is good, etc. The problem started happening when the power cord came loose. I plugged it back in and the problem began. I went out and installed a ring terminal. All the fuses are good, etc. It had worked solidly for about a month prior to this.
     
  2. #2 schultzy225, Nov 15, 2011
    Need to put a voltmeter on the wires to see if its actually the amp or the wiring
     
  3. #3 mhughes, Nov 15, 2011
    How bout the remote turn on wire, thats wat tells it to turn on with the headunit.
    Otherwise make sure that positive is in there really good
     
  4. #4 daltonmc, Nov 18, 2011
    Remote turn on is good, wires are good. Conclusion: Amp is fucked.

    Bright side: Prime oppurtunity to get a monster.
     

Share This Page