I have a terminator Mark III Close loop extraction system. Bath temperature between 80 and 90 on extraction. Temperature in the purge is 114. I have ran several different types of product and always end up with either a dark green or dark amber color. Thought maybe was too much moisture so I have tried letting it dry very dry. This is a pic after 72 hour purge rolling every 24 hours. Smooth in smooth out with a tiny creeper cough and hits like a freight train but for some reason everyone in my area wantes it to be lighter
A little more info I have a 1 pound cylinder for my product. It takes 3 pounds of butane to flood the cylinder. The first two times I flood the cylinder The butane is running so dark you cannot see through the Sight glass for the 1st pound of butane. The product I am running is all top shelf Bud. Am I grinding it to fine?