Custom Built Grow Rooms

Discussion in 'Grow Room Design/Setup' started by RecStoner, Nov 6, 2014.

  1. Converted a section of a camper in to a grow room for someone.
     
    10L X7.5W X 6.2H ft.
    Walls, Ceilings and covered with Microbial Surface, Washable Material. (Immune to water)
    Sub floor covered with 1/4 inch Syenthetic Concrete Board
    Rubber Membrane covered floor with 5 inch overlap under wall material
    Vinyl Flooring for a wax free finish that also covers the lower wall by 5-6 inches
    Foam filled composite entry door, rubber seal
    Tyvek Wrapped and Silcone Sealed
    LED work light
     
    100% Copper/Brass Plumbing
    Triple Filtered with easy, cost effective replacement filters
    Automatic Water Control keeps 15 gal of water stored at room temp
    Automatic drip irrigation, though they don't seem to be using it :(
     
    2 X 30 AMP 240V Circuits
    4 X 20 AMP 120V Circuits
    All Copper, no aluminum wire
    220V Built in Automatic Timer
    Ceiling mounted outlets
    GFCI Protection
     
    600 CFM Cap Discharge Direct Vent Motor/Fan Combo
    8 Inch Carbon Scrubber with Prefilter
    Sealed room with Filtered Intake
    8 Inch straight ducts, no flex hose of any kind.
     
    4 X 600 Watt HPS Lighting
    High Reflective Covers
    Retractable Cord Mounting (Lift and Lowes each light like house blinds)
    Spare Ballast mounted and ready for use as a spare, wired in to be used as a 5th if needed
    Fire/Smoke/Alarm detection with automated alerts
     
     
    At their request, I am unable to disclose details or pictures of the outside. In fact, I took no build pictures at all. 0. Some people are really paranoid LOL
     
    Their temp stays between 65 - 85 Degrees
    Humidity 45-50%
     
     
     
     

     

    Attached Files:

  2. Lol, I would never use it for real. But I Love it! I would totally use it if I weren't so paranoid
     

Share This Page