Quick Fix Synthetic Urine

You get directed to the same, exact product with a few different URL's (ie quickfixurine.com, urineluck.com, quickfixsynthetic.com)  and as long as it is made by Spectrum Labs and you can call to verify the batch and manufacture date, you should be golden.  I have bought from all three, depending on what type deal I was looking for or who had free shipping or whatever, and all purchases have been the real thing.
 
As far as the uric acid, it should not cause any problems if it is in there and they do not test for it.  Your own urine has uric acid in it, they just don't care/check it in most states AFAIK.  Good luck .... Quickfix sure has done right by me, and is enabling me to make it through hard things in life more easily in my aging years.

 

Used quick fix 3 weeks ago at quest diagnostics and passed with flying colors. Im not sure how old the pack was and what the batch number was but it was in my for more than two years and went through drastic temperature changes. I had a 6 hour time frame to take the test, so I was able to find the best way to keep the temp in line. I found the beat way to keep them temp around 95ish was to secure it under my belt with the hand warmer. What I didn't account for was the hour fifteen wait. By the time I got in the bathroom to take the test the temp was above 100 degrees. I tried to cool it off by blowing on it with the cap off but when I poured it in the test cup all the temp bars instantly lit up. Luckily the employee was an oblivious part time and must not have looked. Long story short after 2+ years in my car this stuff works.

 

Ive been using the Quickfix 5.7 canadian version for a licensed healthcare job in a hospital for years. This was in a smaller ignortant state though. I just moved to CO for a much better position at a hospital. Can anyone confirm they have passed a CO hospital preemployment drug screen with QF 5.7 canadian? Just checking if colorado has changed the way they drug test since our beloved plant is legal now. Any advice is appreciated!

 

Thank you for all of the great info in this post. I had a pre-employment physical and urine test at US healthwoks in CA. Everything went smoothly until the Dr. pulled me aside and told me my nitrate levels were high (1000). I read that anything over 500 is a read flag! I used Quick Fix 6.1 that I purchased directly from Spectrum. The sample will be sent to Quest Diagnostics. Has anyone else had this issue? I emailed spectrum and they have not emailed me back.

 

So I'm rather spooked at the moment and could really use some reassurance. I've never subbed before so this will be my first time. I'm at my current job at the moment but immediately following my shift I have to go into concentra for a DOT Physical/Non DOT drug screen. I have quick fix 6.1 and have practiced numerous times keeping temp and storing, however the closer it gets the more and more discerning thoughts are popping into my head. I have on a pair of athletic compression shorts, however I got to thinking and now I'm worried that if they do a hernia check the fact that I have on such tight undergarments will arise suspicion... Thoughts? Also why is it that some people get back results that state Synthetic. If the quick fix has urea and acid in it, what's the issue? I've read a lot of threads and advice and I appreciate everyone working together here... But boy am I nervous....

 

I wanted to give an update. My sample was sent off to Quest Diagnostics and it passed. The nitrate level was a scare, but that might have been a fluke with the in office test. I suggest everyone reads this entire thread and follow the advice. Quick Fix 6.1 works!! Just make sure you sub right. Again I want to thank everyone for the advice!

 

reading the success stories makes me feel a little better about my firat time subbing this upcoming monday.

 

I just went to LabCorp to take my pre-employment drug screen for Best Buy. About three weeks ago I had purchased two 2oz bottles of Quick Fix 6.1 w/ Urea. I called Spectrum Labs to verify the batch # and everything checked out good. I practiced getting the temp right and on the day of testing I microwaved the bottle for 9 seconds and then stuck the bottle in my gooch (between my nuts and butt hole). With compression shorts I was able to just hold the bottle there for about 25 min as I drove to the testing facility. When I got there I pulled the bottle out in my car real quick to check the temp before I went in and it was between 98-100. I placed it back and went in. I was in and out in 5 min. I shook the bottle really good before I poured into the cup to create some bubbles. I know my sheet said its being sent to First Advantage in Bolingbrook, Illinois. On my sheet it said the temp was good and no split specimen was taken. Now the waiting game...It really wasn't as bad as I though...although I was super nervous I was going to go back there and then the temp wasn't right but it was. I'll keep you posted when I hear my results. Thanks everyone

 

a quick update...I just went in to Best Buy and accepted my new job. Quick fix 6.1 with urea works!

 

I had an interview today was told I need a pre employment physical and dt I want to use fake pee but not sure how to conceal it because im.not sure if I'll be doing the dt and physical at the same time and I know they check your balls for a physical so obviously I wouldn't be able to store my fake stuff there any suggestions are much appreciated

 

Just wanted to post that I passed my test using Quick Fix 6.1 batch number ST163B20U. Hope it helps someone!

 

Thank you for posting! Do you remember what site you purchase your Quick Fix from?

 

I purchased it from a local shop.

 

Hey guys i took a preemployment 10 panel test at concentra and i used quickfix 6.1 w urea. they sent "my piss" to quest in Ks. It was the right temp and everything he marked yes to that question. I took the test thursday 5/19 and it is now teusday 5/24 and i havent heard from my employer or the lab? And im starting to trip out of my mind cuz i kinda need this job... Only reason i hadnt used my own was because i had smoked constantly up to 2 weeks before the testing. So i doubted i would pass. My first time doing this and i just want some opinions... Im so tempted to call my employer tomorow and ask whens my start date... Really wanted this job at ford..

 

Did you pass?

 

Yes fam lol

 

So I took the non dot drug test here in Cali, they put the fake piss (QF 6.1) in two different vials and the temperature was fine and sent it to the lab. I'm just getting nervous reading about the people that say they failed. Kinda scared cause idk if they'll detect it being synthetic. Thanks.

 

Just adding an experience here. 6/14/2016, afternoon. labcor, east coast US.

Result: PASSED!

Male, >35, medium build.

Had to go in for a standard pre-employ test today.

I purchased qf 6.1 (3oz) about 2 weeks ago in anticipation of being tested after job offer.

Kept it in a cupboard with no light and remained at room temp. Purchased a couple of pair of VERY SMALL/TIGHT briefs and boxer briefs to practice how I was going to conceal the qf bottle. THIS PRACTICE IS CRITICAL! Male or female, know your frame, purchase some tight underwear or bra, whatever, and figure out how you'll be comfortable with the bottle. Walk around for a couple of days and PRACTICE.

Test was for a normal corporate gig and process consisted of:

Entering facility;
Signing in; providing name and arrival time on sign-in sheet;

Walking back and meeting clinician.

Was asked to wash hands, then pick sample cup/packet and unwrap.

Clinician indicated min fill line, then escorted me to restroom for non-supervised sample.

Sample cup was small, and fill line indicated only requested about 1.5-2.0 oz.

Entered restroom, closed door, and proceeded to fill sample cup with qf slightly above indicated fill line. Cup had a snap lid, so I zipped up, snapped lid, re-stashed qf bottle, and went back out to clinician. Note: the snap-lid was a relief to me as there was no chance for clinician to smell or check for obvious pee bubbles, or lack thereof. I didn't pee any extra or dump any qf into toilet.

When entering lab, qf temp strip read ~98, and when walking out of restroom, sample cup read 94-96. Maybe a 5min wait in the lobby, and was prob in the restroom 1-1.5 min total.

Was asked to sign and date 2 forms, and was given 1 to keep. Per form, specimen was NOT split, and temp was checked YES for between 90-100 degrees.

My hints/experience:

- I didn't really use the hand warmers. After walking around all day with bottle in crotch, the temp remained a steady 98. Your experience may vary, but be sure the temp is at 98-100 as you head into test. Prepare for any lobby waiting time as necessary.

- PRACTICE. Can't stress this enough. It's nerve racking as-is, but the more comfortable you are "carrying", the less nervous you are when doing the deed.

- Stay calm. This was one of the most treacherous things I've attempted. I prepared myself mentally and visualized how the experience would go, and stuck to that vision. I was still a bit shaky, but when it was over, I realized it was so damn easy.

 

what about California? since they do the whole testing for synthetic. Still no call.

 

Any Cali folks care to chime in?

As mentioned, I'm east coast. Haven't heard about any specific Cali-specific testing changes. How long ago was your test? Was the test for a firm, pending offer? Have you reached out to employer for an update?