I put my clones in yesterday they looked good but I didn't get a close pic. Today they are looking dry and two look almost dead. My system is an ebb and grow monster (I've only done one other grow and it wasn't ebb and flow it was bubble bucket). I'm not sure how many times I should water or if my lights are to close (last time I used led and cfls). I have air cooled hoods with 600watt hps with enhanced spectrum bulbs (but they are turned down to 360w) they are about 3 feet above the ladies. Co2 is at around 1400, humidity is about 45% and temp is 75 to 80 degrees. Totally sealed room. I've read some ones thread that had smaller ebb and grow that watered 4 times a day (that's what I started at). I have friend that has a drip system that waters every three hours. PPM's are going up without adding nutes. Started at 250 PPM and now it's at 371 PPM's! Could it be because we rinsed hydroton with tap instead of RO water? Any input would be way helpful!!
here are some pics. The overall shot was right after transplanting. We also are hand watering as well. Anyone knowledgeable on ebb and flow or babies??