VERY cheap heatgun vaporizer design

What you need

1x brass hose nozzel (pictured)
1x brass male coupling that threads into the hoses end (pictured - make sure the smaller end sits well in the hoses spray end
1x metal/cork/ect topped jar or filtering flask
1x Sears Craftsman part #27801 or other similar variable temp heat gun (if the one you buy doesn't come with a reducer tip buy one or just get the craftsman)
1x screen that'll fit the hose end of the spray nozeel nicely

All you need to do is cut the reducer nozzel with a pipecutter or whatever down to where the outer part of the hose nozzel slides in very tight from the inside (you can try using the reducer alone but I like the way the rounded joint of the brass/brass fits) so you have this point with a recessed mouth to mate to the brass male couplings smaller end.

Once thats done you're done fucking with the heatgun...don't forget to remove the 2 rubber things from the other part of the hose end...

Next up find a container with a top you can pop a pair of holes in. Once ya pop the holes you just drop the inner part of the hose thing in fit it snug then add a screen and some tubing/ect to the exit hole.

Heres a shitty drawing along with the parts images I could find.

Basically just make sure the male brass thing fits well small end to tip of hose thing and the threading on the bigger brass end and the inside hose part that normally hooks up to a regular garden hose screw together nice and you're set. Everything else can be swapped with another heatgun/jar/ect easily...

Fill the container with water if you want pack the male nipple thing fulla herb (screen the bottom off too if you want) then screw it on to the hose end of the inner bit fire up your heatgun let it get to temp (dial 5 on the sears model works well) then just mate it to the nipple and watch the vapor start filling the thing...

Edit - better image

The outer piece is obviously in use above so it won't be in the jar you use (buy two an make it direct downwards maybe?)

You cap the oven bags user tube with a filter of a cig or something upon deflating it totally then pack the brass nipple (with screen in both sides of the bud chamber) and screw it in upside down with the flask or just push the screen in the nipple an screw it on right side up.

It starts milking the flask till its' cool an free of particles and upon reaching the user it's smoother then any roor...gets you 2x as fucked too

 

Fuck I'm spaced out... didn't label the downstem looking part at all...

Well basically it's the innard of the hose bit you use on the heatgun reducer upside down with a screen in the part that hooks up to a normal garden hose.

I shoots out 2 holes sideways...works well for my flask application but you may wanna cut it off so it shoots towards or into water somehow...

Also this is pretty sweet... lop a small bit of the tubing off get a renyonds oven bag cut a small hole in the upper corner an tape the bottom opening rolled up like 2 times really thin all the way to one end and insert the tube coming off the container into that then add the bit of tubing to the tiny top cut on the corner an toss a rubber band on...you can plug it with a cig filter before you start filling the bag and it's easier to deflate it totally this way plus you never detach it. On top of this the whole brass bowl assembley retains heat evenly so it actually vaps another few minutes slowly as you inhale off the bag filling the container for a nice lil end vap...

Anywho I just ripped a fresh bowl of kind outta this lil doodad and I'm stoned six ways from sunday...even that lovely couchlock feel is present.

Someone build one! it's like 99 for the heatgun another 2 bucks for the male nipple thing 2 more for a hose thing and you can dig up screens a jar and some tubing as well as a bag almost anywhere...

 

Updated ...guess edits don't bump shit lol

 

Be careful... I packed 10 bowls of stuff I vapped in my vaporwarez already (never gets it all with just you inhaling slowly) and a single bowl of fresh kind..

I was out like a light...really heavy maranol like body high. I just wanted to sleep all day...lol so I did. Felt great but yeah if you make one an hit it till your stoned senseless don't expect to go partying...

 

Just added to it...this thing is ghetto as hell but I'm loving the design. I'm thinking of dubbing it the sidekick based on how 'couch friendly' the whole thing is.

Same design as before except I lopped the tube into 2 pieces one from the flask being long and the one on the bag being short.

I then downed a grolsch cleaned the bottle wrapped it in paper towel then wrapped that in that 'press 'n seal' shit they make to keep the flask from hitting glass.

Next up I filled the bottle with water to about the 1/4th mark shoved the bag tube in side by side with the flask tube (just like those cheap 'bottle bong' things) an sealed the tubes in place nicely.

I also used a brass compression fitting 3 rubber bands a bigger turkey bag another tiny inch or so long bit of tubing a plastic bendie straw and a whole lotta giggling stoned fits...

After you have the flask with the bottle you just slide one rubber band over the open end of the bag then slide the brass ring over that roll the excess bag over the brass ring and slap another rubberband over that around back to make it the tube connection to the vap.

Next bit is just the upper corner fitting with the bit of tube an sealed tight with a rubberband. You seal it fill the bag toss in a disposable straw for a party mouthpiece an hit away.

I really gotta get a picture of this thing up... it's dirt cheap and I'm sure it kicks the cano's ass...

 

I was in stoner creative mode at the time lol

you'd be better off going for

heatgun

brass screens (2x large as normal sink screens from headshop)

bong or filtering flask (lotta science surplus stores or online shops sell them)

gotvape or vrip tech vapor bowl (gotvape is better imho)

tubing if you go for a filtering flask and a cork stopper for flask (some sites/places sell ones pre-drilled but soaking the cork in water and slowly using a drillbit that matches your bowl by hand works)

longest downstem you can find is also needed for flask so you can pull bowl to clear the chamber of vapor