1. Last day to win a Pax2 Vaporizer! Subscribe on YouTube to be entered to win a PAX 2 Vaporizer! Winner will be announced Sept 1
    Dismiss Notice

THC extraction methods list!!!

Discussion in 'Harvesting and Processing Marijuana' started by josephspare21, Dec 6, 2010.

  1. #1 josephspare21, Dec 6, 2010
    Last edited by a moderator: May 5, 2012

    Is there any other methods out there?

    bho - butane hash[ame]http://www.youtube.com/watch?v=THpQ9Mwb6Yg[/ame]

    budder - whipped bho[ame]http://www.youtube.com/watch?v=zcaLGxk_m9c[/ame]

    jelly hash - keef or powder hash mixed with bho[ame]http://www.youtube.com/watch?v=_JVliIOpnHQ[/ame]

    bubble hash - made with bubble bags[ame]http://www.youtube.com/watch?v=Uf0skTsA1bw[/ame]

    iso hash - made with alcohol - [ame]http://www.youtube.com/watch?v=a6CXiqh0tok[/ame]

    qwiso hash - made with alcohol[ame]http://www.youtube.com/watch?v=015oFyX5beo&feature=related[/ame]

    kwiso - Kief-Wash Iso

    ice hash - [ame]http://www.youtube.com/watch?v=yflSQkrC7es[/ame]

    gumby bubble hash - [ame]http://www.youtube.com/watch?v=Ro_-Y7wQqYo&feature=related[/ame]

    not really an extract but here:

    canna butter - for cooking

    canna oil - cooking[ame]http://www.youtube.com/watch?v=-0xTUivVS9w[/ame]

    Cannabis Tincture - weed liquor

    kief hash - [ame]http://www.youtube.com/watch?v=vXppBJLLgok[/ame]

    what else is there????? i really like trying new extraction methods. so plz add more if there is more.lol
  2. Acetone extraction (very dangerous!)

    Chloroform extraction (this is the best way, as wax and chlorophyll do not dissolve in it, i.e. no green oil)
  3. hexane, co2, rosin which is bubble rubbed on a warm bowl,
  4. What is the pro's for extracting?
  5. Lipid extraction...

  6. Extreme potency. Much different high due to that potency. Ability to transport large volumes of intoxicant, compared to shipping weed.
  7. Extract via smoking raw plant matter. My lungs do the extraction.
  8. #8 josephspare21, Dec 7, 2010
    Last edited by a moderator: Dec 8, 2010
  9. #9 josephspare21, Dec 7, 2010
    Last edited by a moderator: Dec 8, 2010
    kool little tut i found

    How to judge Good Hash

    Pinch a small lump of hash (about the size of a match head) on to a flat enamel surface or ashtray, and play the flame of a lighter over the hashish for a few seconds. If it's GREAT hash it will light on the first or second attempt. The harder the piece of hash is to light, the more likely it is that you've been sold a 'lemon'.
    Once you've got your test piece of cannabis in flames, let it burn for a couple of seconds and blow it out. The embers should glow evenly like fine incense or a hot coal. The smoke it gives off should be milky white to blue gray with a heady, rich and sweet aroma. If you can smell rubber, this is never good, and is another excellent indication that you've been shafted.Once your hashish tester has burnt completely, you should look for a fine white ash. If it's too dark, this indicates contaminants. These can be anything from waste leaves to car oil. Around the ash, a ring of oil will form. The more oil and the lighter it's color, the purer and higher quality your hash

    Morocco hash making

    If u ever get bad hash -

    Simple Soap Bar (Hash) Purification

    "Soap" is hash that has been mixed with all sorts of junk (including bee's wax,
    boot polish, coffee, milk powder, asprine, paraffin wax, etc). Soap purification
    removes the impurities from hash, leaving behind a more pure product.

    You will need:



    Coffee Filter
    Boil the kettle and fill a large bowl with the boiled water and then add the soap. Allow the soap to soak and soften for 2 minutes or so, then crush it as well as you can with the fork into a powdery form. Stir the mix for between 5 - 10 minutes (longer if you want).

    The water should turn color - that's all the crap that your hash was cut with!

    The hash should be clumped in the bottom of the bowl, most of the impurities should be dissolved into the warm water. Pour as much of the liquid down the sink as you can without losing the mass hash, and then pour the rest through the coffee filter.

    Shape the hash and use a towel to remove much of the water. Leave to dry (or use a blow drier for a quicker dry).

    The cleaned hash may be powdery or flakey (and not remain as a compressed lump). A good method to solidify the hash is to put all the hash in to some tinfoil (nice and tight), heat the tinfoil gently and then squeeze to hash down (using a book), then leave to cool.

    The hash should be more pure; you will notice that the remaining amount is smaller that what you started with. Less quantity, better quality.

    Note: if the hash has been cut really bad, you may want to repeat.

    How it works:
    THC will not dissolve into water; dissolving the soap into hot water separates most of the impurities from the hash.
  10. Is there any evidence/indication as to which method is most effective, IE extracts the highest amount of THC in relation to amount of product put in?
  11. Not really, no. There are too many variables, and any extraction technique is going to miss some cannabinoids. In my opinion... I would:

    Kief sift, remove the loose trichs with a mesh screen like OSG's kief tutorial. After that, run it through butane once or twice. After that, the rest of the bud can be either QWISO washed once, then used in edibles. Thats basically the only way to make sure you don't waste all of it.

    .Carbon, You asked about the turkey baster as an effective BHO container, I think it should be safe if the turkey baster isn't a type 6 plastic or a type 3. Find out the type of plastic and search it... The safest to use are HDPE and LDPE, imo.

  12. Is it safe to cook with product after it goes through a QWISO wash?
  13. After evaporating, yeah.
  14. Definately allow it to evap completely! Depending on what you used for a solvent, it might contain toxic additives.
  15. #15 josephspare21, Dec 16, 2010
    Last edited by a moderator: Dec 17, 2010
    credit go's to johnisriot of grasscity


    Seen jrblades20 post on THC pills and seen people requesting a tutorial on making them.
    This is not my tutorial, I found on another forum, posted by Mistergrowman.

    1.Olive/Vegetable oil
    2.Any amount of Marijuana
    3.Something to well grind the marijuana
    4.Heat source
    5.Bowl (something to grind and mix the marijuana in)
    6.Pill Capules (empty some vitamin capsules out)
    7.Small spoon

    First, you prepare as much marijuana as you want as if you were going to smoke it. Then, you add enough olive oil, in a bowl, to saturate all of the marijuana. Add the marijuana to the oil. Grind the mixture for about a minute or so. Then, warm the mixture to about 100 degrees. After you have warmed the mixture, grind for 2 minutes( should be the consistancy of a paste). After this is all finished, let the paste cool down. Then, with a small spoon, fill the capsules with the paste. Take a few of these and you will be F*CKED up for a few hours (depending on how much you take. Keep in freezer for storage.

    Once I find a hookup near Minneapolis or Luck, I'm going to make quite a bit.
  16. Did you actually read the whole thread, or just post it? I'm pretty sure it didn't work if I remember right. The pill recipe works though.
  17. Love all the work put into this thread.

  18. anyone got anymore methods?

Share This Page