Grasscity - Dab Rig Sale - 50% Discount

Shatter

Discussion in 'Harvesting and Processing Marijuana' started by organicjake, Apr 26, 2016.

  1. Okay, so I have some shatter I'm making and it's turning out really well, see through, light yellow, looks perfect, but it's a little sappier than I was hoping for. I'm looking to obtain that hard, glass like consistency. I've been vac+ light heat purging on and off for about 24 hours, am I on the right path and with continued purging will get what I want?[​IMG]

    Thanks in advance for any help!


    Sent from my iPhone using Grasscity Forum mobile app
     
  2. I ate 2 grams of blueberry shatter that was not decarbed and it killed my pain n put me to sleep for 4 hours but no other effect.
    My next batch I'm going to decarb and put in capsules at 350mg.
    Ought to work well as medicine for my autoimmune disease.
    One cap a day at night.
    Blueberry haze.

    Sent from my SAMSUNG-SGH-I337 using Grasscity Forum mobile app
     
  3. Cool


    Sent from my iPhone using Grasscity Forum mobile app
     
  4. Nice man. What I use gets too hot and makes it amber but see through. No bubbles either. Just burns a lot of the good stuff I hear. Really can't wait to make some yellow bho. Mine is very sappy too but if I do a water bath it will be shatter.

    Sade's outdoor Bigfoot territory grow
     
  5. IMG_2327.JPG Learn Bout de waxing yet?
     
  6. Oh yeah. I've learned so much since this post. [​IMG][​IMG][​IMG]

    That second pic there is the fats and lipids I pulled out of a slab a while back.
    How crazy is that Lol


    Sent from my VS995 using Grasscity Forum mobile app
     
  7. What is your process now if you don't mind me asking?
     
  8. Well, I have a closed loop system, I do not use active. I will say this: it all comes down to material. A monkey could make bho. The fresher (but completely dry) the better, yellower, etc.

    I put half the amount of tane ill be using into my deep freezer along with my fully packed tube, wait till the tube is frosted over, then I pull a vac on the entire system, and blast all the cold tane into the tube followed by the other half, non cold tane. This speeds up the amount of time the solvent is in contact with the material. Once in the collection base I use as little heat as possible (usually none) to get the amount of time down to an amount that is easy to pour but not thick. Once that happens I poor it into a silicone pie pan wrapped in raw parchment paper on heat. Once it gets to big bubbles / very thick but still runny I put it in my oven, pull a 15hg vac, release, repeat (till it stops muffining so big) then pull it to full vac. pull it out, freeze it and flip every 12 hrs if u can for 3 days. Oven temp:102

    Humidity while your blasting is a huge thing too. If you can't get it to shatter you prolly have high humidity.

    Sent from my VS995 using Grasscity Forum mobile app
     
  9. I have a strange problem, i use similiar equipment like you. When I start bringing back gas from extractor to bottle, the colour inside extractor is clear yelow, and it stays like that untill 5 mins before it all goes back. At that time, some sludge starts to concenrate in the midlle of extract and it reacts with rest of it and heavily and very much impacts on rest of the colour, and darknes it. Later in baking on max 39c in vacuum oven, it goes darker and rest is lighter? You have any idea what that is?

    Sent from my Lenovo K53a48 using Grasscity Forum mobile app
     
  10. This is because you're diluting the actual color into more tane. Dark is the real color. Hand trim, fresh, frozen, then you'll get the color youre after

    Sent from my VS995 using Grasscity Forum mobile app
     

Share This Page