Quick fix 6.1

Thanks for sharing. I am subjected to truely random dot regulated tests where i am notified that my employee number has been randomly selected and am escorted to the on-site drug testing office. I yet to be randomly tested but carry quickfix in my undies at all time along with a heat pouch for WHEN my day of reckoning comes.

Since you have been subbing for so long i am wondering how you prepare

 

Passed dot drug test on 5-10-16 with quickfix 6.1 WITH UREA. just make sure it Temps out. Better too hot than too cold just pour in sample cup immediately and let cool as you pee in the toilet. Don't stress just verify batch number and follow instructions. Be easy!

 

6-3-16 used QuickFix 6.1 with urea (Purchased a week ago in Roseville, CA at The Outer Limits smoke shop) substituted the urine at US Healthworks in Rocklin, CA for a 5 panel pre-employment DOT test. It was sent to CRL in Lenexa, KS. I will post the result ASAP

 

I had to take a 10 panel non dot drug screen for a job. It was at a health clinic and the use escreen. I did not use the ecup. I used QF6.1 plus that I purchased at a smoke shop. Called Spectrum Labs and they said it was good until 11/17. I microwaved for 10 seconds. Heat read at about 98. I wore long pants and a loose shirt and kept it against my skin right below the belt buckle. It was stashed for probably 35 -40 minutes from the drive and the wait time. Make sure your are being cool. Make eye contact, small talk. I went in and poured about 2/3rd of it in the cup. Did not go myself at all. Stepped out and handed it to the nurse. Again making small talk being calm. I did not watch what she did with it as she had me go wash my hands. I did have to sign an electonic pad and also initial the vile with the sample. I asked how long it would take for results. She mentioned that it can take up to 3 days but said that my results should be available that afternoon. That afternoon? That got me thinking it showed up as a negative. And sure enough I got the results back that I passed. The temperature is key. Also as I stated before, be calm and cool. When I was done I took up the receptionists offer for a Keurig coffee. Chatted with her for a few minutes. I didn't just rush out the door. Don't give them a reason to suspect your are subbing. Quick fix works!

 

Oh yeah, by the way. I am in Oregon. Keeping it green!

 

Oh yeah, by the way. I am in Oregon. Keeping it green!

 

literally everyone that posted on this raving about QF started there account the past few days, please nobody believe this BS

 

I made this account today just to post on all Quick Fix forums stating it's awesomeness!
I am in a medical program and get a surprise drug test every year
This was the first year I wasn't ready for it and after reading tons of websites, reviews, and forums I decided to go with QuickFix 6.1
I was super nervous about it because I had never subbed before, but thank God the product backed itself up.
I took a ten panel test in TX at LabCorp (results sent to Houston) and after 1 day I got my passing results!!!
Having to sub was super nerve racking for me because of how much was at stake (getting kicked out of school and losing my licenses to practice) but QF came in clutch and I high recommend it to anyone.

 

I just want to say, Quick Fix 6.1 is amazing. I read these forums for weeks on end, and wanted to give back to the community. I am 6'1 220 and smoked once a night for 10+ years. When I found out my company was going under, I was forced to look for a new job. I quit smoking when I found out, which sucked. I thought the search would be slow so I would have time, but I landed an awesome offer within 2 weeks. I was able to delay the test another 2 weeks, but I kept coming up positive on my home tests. I bought a QF6.1 2 months ago when I heard the closing rumors, so I had my backup plan. After reading all the posts on here and all over the interwebs, I gained confidence. 3 days before the test, I was still positive so I decided to go with the QF. I used a pair of ACE compression shorts that has a little pocket meant to hold a cup (for baseball). I had the 3oz QF which was a little big, but turned out to be great, bc the woman at Quest marked the line kind of high. Anyway, I noticed it sloshed a bit, so I took a cheap knit glove and cut the fingers off to make an insulating pocket. I practiced the day before by doing a dry run. Stuck the QF in the microwave (cap off) for 10 secs and strapped the heating pack to it, then into the glove, into the cup pocket. After the 10 secs it wasn't hot enough, but the handwarmer had it over 100 within the hour. 2 hours after microwaving, it was still over 100 in my shorts. I took the heating pack off to test how fast it would cool, answer is 2 degrees an hour with my setup. Knowing all this, I was prepared for the test. The lab was 1 hr from my house, so I microwaved and put the pack on, but before I pulled into the parking lot, I stopped to check the temp. It was over 100. So I took the heating pack off, unscrewed the cap, and blew on it a few times until it was 98-100. Put it back in my pants without the pack, bc I knew it would only drop 2 degrees per hour, and the wait wouldn't be more than an hr. Went in and there was no wait. Emptied my pockets, rinsed hands, and into the bathroom with a loud exhaust fan. I set the cup on the sink and pulled my pants down so I wouldn't have to hold my junk while operating the bottle (I wore dress clothes to look professional, but don't wear a belt! Made it easier to access and didn't make a noise pulling my pants down) started peeing in the toilet and unscrewed the cap (don't use the squirter top, it's unnecessary and can cause a sucking sound). I stopped peeing and dumped the qf into the cup, then resumed peeing in the toilet for authentic sounds (no one was even standing there listening). Quickly finished up, tucked the bottle back into the cup pocket and ran it out of there. It dropped from 98 to 92 in a minute, so you can't dick around (pun intended). Before I put it in the cup, I shook the shit out of it to get bubbles, but after a few secs in the cup, there were no bubbles. The lady didn't look or care. Just marked it was between 90-100, sealed it and had me sign a few things. My hands were shaking so bad, but she either didn't notice or care. Anyway, then I waited for news for days, but no news is good news. Started my job and I couldn't be more thankful. This stuff totally works, as long as you get it to temp (and verify your batch). I'm sorry this was so long, but you have no idea how much these posts helped me in the days leading up to the test. I read and reread hundreds of posts, and I always said I would give back to the community and post my results (good or bad). But this stuff totally worked. So my advice to you is if you can't pass on your own, use QF. It will work if you follow instructions. And make sure you practice. I practiced and envisioned exactly how I was going to do it, so when you're in that bathroom, it's clockwork. Hope this helps whoever reads it. Good luck!

 

Does quick fix work for medical professional panels?? Help

 

I want to share my experience with quickfix 6.1 plus even though it is not fully over yet (havent got the results of passing or failing). A little background is I used quickfix (I couldn't tell you what version) about 5 years ago for the exact same job I took one for today. I was fired about 10 months ago so I reapplied because its a job I really enjoyed. Anyways, i'm a very light smoker maybe a gram a week but I knew I couldn't trust my own urine so I decided to go the quickfix route again. I ordered the quickfix from urineluck.com about $40.00 for the 3oz. bottle, I wanted to make sure to have enough. I had to go today to meet with the HR person and sign my background check papers and get my paper to take for the drug screen. She told me I could do it anytime from today (Wed.) and Sat. i decided to go right after because I already had the quickfix heated and waiting in my car. How I heated the quickfix was i followed the instructions of shaking then microwaving, I microwaved about 12 secs because my microwave is only 700watt then shaking again, I then strapped the handwarmer it came with and one that I had laying around because I knew it would take me about 30 mins to get to my job location and 30 mins from there to get to the DT facility which was a urgent care in my town so I wanted it to stay plenty warm. I put the hand warmers one on each side and put the quickfix back in the box and put in the console of my car. After meeting with the HR lady I got in my car and took the quickfix out to check the temp, it was at about 90 degrees so I decided to take the handwarmer that didn't come with it off and just leave the one that did on (also make sure when you have one warmer the warmer is on the opposite side of the temp strip) and then I gooched the bottle on my ride to the DT which I said was about thirty mins. My plan was that when I got there to check the temp and if it was good I was going to go ahead and do it, if not i'd come back another day. Well when I pulled in I checked the temp it was at about 96 degrees so I figured perfect i'll go ahead and go in and do it. I situated the quickfix tightly in my crotch and made sure to wear loose pants so it would be harder to tell the bottle was in there because it is a pretty good size. Also I had duct taped my briefs on the bottom of the legs to ensure the bottle wouldn't slide out down my leg. After entering the facility I played it cool, made a little small talk with the lady working and she told me to have a seat and that it may be a little of a wait. After about thirty mins of waiting they finally called me to the back, I greeted the nurse with a hello how are you and a smile. He was very nice I couldn't have asked for a better person (i've seen some stories with some rude nurses.) When we got back into the room he apologized for the wait and asked me to empty my pockets into a tray, remove my coat and hat then he handed me the sample cup. He said fill it past this line but not over this line. I was worried here because I know you're supposed to use the whole bottle but I knew I was going to have some left over. I went into the restroom he told me I had four mins, not to run water or flush afterwards. Luckily this bathroom was huge and the toilet was very far from the door so I knew I would be able to discretely open my bottle and dump it without having to do the piss and pour method. Now one thing I forgot was to shake the bottle before putting into the sample cup, I am hoping me walking like I had nothing to hide shook it up enough. So I poured it up to the max line then dribbled the rest into the toilet which was just under half the 3oz bottle, to make the sound of pee and make it look like I did pee because I was too nervous to actually go. I walked out handed him my sample he covered it with the lid and we went back into the original room where my stuff was. He marked the temp was in the correct range and dated the top and told me to initial it which I tried but my hands were shaking pretty good and I kind of just scratched them on there barely legible. I made a small joke about it and he just laughed. So he put my sample into the spinning thing and had me sign the pen pad on the computer then he handed me a paper and said you're good to go congratulations on your new job I said thank you and got the hell out of there. I live in Ohio and my drug screen was a Escreen through Alere Toxicology says its going to a lab in Kansas or Virginia I dont know why there is two addresses. Now I am hoping the creatine or urea levels arent going to be messed up because I couldn't use the whole bottle and forgot to shake if someone can reassure me please do. I wanted to share my story because i've been looking through these threads trying to set my mind at ease so hopefully I can help someone else do the same. I'm about 95% confident in quickfix like I said I have used successfully before I just don't know the technological advancements in drug testing since then. I will post my results when I know for sure. Wish me luck please!

 

Got the call today that my drug test and background came back good and I got a start date.

 

Nice to hear someone has had success at the same lab my quick fix is being tested at, hope mine works, waiting to hear the results is stressful