QF6.2 July 2020 Passed Quest Diagnostics

Hi everyone. First time posting, but I felt like I owed the community my experience with Quick Fix 6.2 Plus.

A little about myself. Male. I'm 24 years old. Currently a student. I weigh 152 pounds and I stand at a not so tall height of 5'6". I have been smoking since I was 14. Consistently 24/7 from 18yrs old to now. I have taken 5 drug tests in my entire life, all of which I have PASSED. The first test I took, I used Synthetix5. But for the remaining tests, I used Quick Fix 6.2 Plus (GET THE PLUS. YOU WANT 3OZ TO BE SURE).

I recently got accepted into a nursing program. So I had to take a toxicology test. Anywho, it being 2020, I stressed out at how up to date Quick fix's new formula is. With how often I smoked, I knew I had no choice but to opt for synthetic. From all the hours of research, I recommend Clear Choice, Sub Solution, and Quick Fix 6.2 Plus.

Test information:
Location: Quest Diagnostics
Type: SAP 10-50/2K/TS+COT2 SPLIT TEST
My interpretation: SAP=Substance Abuse Panel
2K= ketamine related drugs? Idk. Inform me if you know.
TS= Test Sure (Quest Labs way of running a SVT (specimen validity test)
COT=cotinine (the active by product of nicotine metabolism)
UNOBSERVED. Preemployment tests are never observed unless you gave them a reason to feel like they need to observe you.

I had set an appointment for earlier in the morning (no proof to back this up, but I feel like early morning appointment=less people the tester has seen=more easy it is to have a genuine conversation with tester).

The morning of the test, I checked online AND called the official website to make sure my sample's batch number was good. First thing when preparing the piss was open the handwarmer (I brought an extra with me). Shook the bottle gently. Heated up my bottle AFTER removing seal for 8 seconds, an hour and 15min before exam. Shook bottle again. I did not heat for 10 seconds, as instructed, because I did not want to risk overheating my product. Temp was at 94. So I popped it back in for 4 seconds and temp went up to 98. Wore tight underwear and a somewhat tighter pair of jeans. Stuck it right underneath my balls. Checked about 5 times to see if temp held and it did. Would have been fine if I didn't check, but hey, this is my education on the line so why take any shortcuts? I drove to the site and shook the bottle again after checking temp. Temp was at 98. (It is important to note that I took a digital temp of the liquid and it was actually 1.6 degrees higher than the strip said. So my sample was probs at 99.6 degrees) and just waited for about 10-15 min at the site after signing in. First thing I did was say hello and made genuine conversation with my tester. I think this is the hardest part of passing the test. Of course temperature NEEDS to be correct. That's already known. But humans can sense when people be sketch or if their hiding something. I was calm, collected, and polite. Before stepping in to the bathroom (private), I washed my hands and emptied my pockets for her. She left and I locked the door. I unbuckled and unzipped my pants, removed the bottle with the handwarmer attached to it. Checked the temp and it was at 98 degrees. Squeezed some of it into the cup while I was actually peeing into the toilet filled with blue liquid. Held my pee in to make it sound like I was peeing in the cup. At this time, I had a little more left in the bottle and realized I needed more in the cup. I couldn't squeeze the bottle without it making a noise so I closed the cap. I coughed very briefly and quietly to mask the noise of the top closing. Then I removed the entire cap and poured the rest in. Continued peeing while screwing the lid back on. Walked out and followed directions and continued with my pleasant conversation with the tester. I signed the specimen and she made no remarks. Didn't smell it or shake it to see if it bubbled. I got my results in about 34 hours! And I fucking passed. Totally thought I'd fail, but the drug testing Gods were with me that day.

TL;DR: Quick Fix 6.2 passed a 10 panel SAP 10-50/2K/TS+COT2 at Quest Diagnostics as of July 2020. Make sure temp is right. Make sure you shake bottle gently from time to time. Check batch number to make sure your sample is good. Buy from trusted websites. Get the 6.2 Plus (3oz not 2). Use digital thermometer to check the discrepancies between temperature on temp strip and actual temperature. Be kind and polite to your tester.

If you have any questions, please feel free to contact me. Best of luck y'all.

 

Wow you must feel so righteous right now. I don't smoke on the days I have to come into the hospital. Worked as a nurse aide for 4 years and haven't been written up for anything or set myself to be in a situation for malpractice. You mean to tell me, that for all the nurses/doctors/lawyers etc. out there that drink alcohol OUTSIDE of their work is okay too? Because if you still think it isn't okay to partake in any substances outside of work, why don't you go protest people who drink on their own time too. You're on grasscity bud. I'd like to think you know that marijuana is harmless when you properly dose and when you use at the proper time. You crack me up