Post your recent homemade piece

Discussion in 'Bongs, Dab Rigs & Bubblers' started by RamboSmoker, Sep 9, 2012.

  1. I made this it took me 4 days, its a bubbler thats a 2liter bottle connected to a coke bottle with 6 separate tubes made from speaker wiring tubing that go from the top of the coke bottle to the bottom 5 edges and 1 that goes directly centered in the bottom, there are carb sliders on each bottle to clear them, the green funnel for the mouth piece and the other thing attached is a homemade ghetto control panel made from a "bop it" toy using the battery terminals to connect the red and green LED lights that are on the bottom of both of the bottles. 10 lights total 3 green 2red on one bottle to 3 red 2 green on the other i melted a spot for a on and off switch and glued it in,i spray painted it chrome and then used paint thinner to make windows to see the smoke...doesnt get more homemade then this :smoke:
     

    Attached Files:

    • hh.jpg
      hh.jpg
      File size:
      50.2 KB
      Views:
      243
  2. a spoon might be less harsher even....something about smoking out of plastic really makes my lungs feel good..........
     
  3. image-2480418193.jpg

    Little steam roller I made out of test tube, and the nest from my metal piece.
     
  4. We had a wicked thread in the apprentice tokers section only yesterday on how a french kid died from a lung hemorrhage from using plastic bottles to smoke weed

    Just sayin
     
  5. [quote name='"RamboSmoker"']I made this it took me 4 days, its a bubbler thats a 2liter bottle connected to a coke bottle with 6 separate tubes made from speaker wiring tubing that go from the top of the coke bottle to the bottom 5 edges and 1 that goes directly centered in the bottom, there are carb sliders on each bottle to clear them, the green funnel for the mouth piece and the other thing attached is a homemade ghetto control panel made from a "bop it" toy using the battery terminals to connect the red and green LED lights that are on the bottom of both of the bottles. 10 lights total 3 green 2red on one bottle to 3 red 2 green on the other i melted a spot for a on and off switch and glued it in,i spray painted it chrome and then used paint thinner to make windows to see the smoke...doesnt get more homemade then this :smoke:[/quote]

    Dude.. are you fucking serious? ...
     
  6. Dude I hope you don't die, this shit is bad for you... and also there is a whole section for homemades
     
  7. Damn dude I once spent 4 days on a homemade piece to! then I realized I can go to a gas station and get a spoon for $10!
     
  8. This is fucked. Gonna get yourself killed. Stop using plastic as a smoking device and stop spray painting shit you heat up... Not to mention paint thinner?
    I thought this was a giant troll... Guess I was wrong
     
  9. Well atleast mine isn't plastic lol... :bongin:
     
  10. Nothing is heated up.enough to melt plastic.or paint, the "stuff" goes into a metal bowl head so I don't.see how it would be harmful if its just the smoke going through the plastic
     
  11. That's a lot of work, but on another note smoke is hotter then you expect and before it goes through the water it's pretty damn hot...
     
  12. So you've stuck a shitload of plastic together and covered it in paint thinner? I normally don't care about people smoking out of plastic shit, but what the fuck?
     
  13. I lol'd reading his description. That's a lot of dangerous shit in there man, but can't say I hadn't done worse in my younger days. I'd like to see the piece better cuz that picture was kinda shitty. I wouldn't smoke out if it these days but if you put work into it than right on. When I was in high school we stole a beaker and one of those slow drip things. Fixed it up to a nice bong but it always had chemical taste no matter how much we washed it. I stopped using it after a while.
     
  14. Trying to sound as little of a dick as possible
    Please don't try and justify yourself, especially on a forum hosting some of the most fantastic glass pieces the world has to offer
     
  15. [quote name='"RamboSmoker"']Nothing is heated up.enough to melt plastic.or paint, the "stuff" goes into a metal bowl head so I don't.see how it would be harmful if its just the smoke going through the plastic[/quote]

    Smoke is hot, and plastic is very reactive. It's not good for you man. People get cancer from DRINKING WATER out of plastic bottles.
     
  16. Have you ever been in a science lab and seen plastic beakers? No, they are borisilicate glass for a reason.
     
  17. I'm with everyone else about the safety of your health when it comes to smoking out of that man...

    But! I do applaud your determination and vision. Looks kinda cool with the LEDs. Just please don't smoke out of it bro!
     
  18. The point of this muhfucka was to post your homemade, not to bash someone who wants to smoke out of plastic, aluminum covered in spray paint, and then paint thinner. Post YOUR homemades and let this guy inhale harsh chemicals. Here's mine, [​IMG]
     
  19. hey kid just invite friends over and have a huge sesh using it a couple times but after that. . . probably don't use it. i made a bowl out of a metal pen once probably aluminum actually. . . hmm just smoke joints if u find the right store they'll sell em to underage hoodlums trust me i know ;)
     
  20. There's a gas station called Kars Petro here in central Florida, and it's so odd. Sometimes I walk in there and I'm like "Hey, can I get an Apple Dutch and some of these papers?" They're like hell yeah, and it's great. Other times they ask for I.D. and just stare at me.
     

Share This Page