Food and Drug Administration (FDA) Disclosure:

The statements in this forum have not been evaluated by the Food and Drug Administration and are generated by non-professional writers. Any products described are not intended to diagnose, treat, cure, or prevent any disease.

Website Disclosure:

This forum contains general information about diet, health and nutrition. The information is not advice and is not a substitute for advice from a healthcare professional.

Pipe Hard To Hit.

Discussion in 'Apprentice Marijuana Consumption' started by Azureth, May 22, 2013.

  1. #1 Azureth, May 22, 2013
    So it was working great earlier, but now when I try to light it and suck it seems very hard to do. Any ideas?

     
  2. #2 Nugagerube, May 22, 2013
    Clogged. Put your finger over the carb and blow into it with nothing in it (Obvious, but just better make) and if that doens't work take a paper clip and stick it down in the bowl. If that doesn't do it your pipe probably needs a good cleaning/scraping.
     
  3. #3 rastaballer209, May 22, 2013
    How big is the hole in the bowl as stated in the post above its cloged so stir it around with a tooth pick and poke through the hole.
     
  4. #4 GanjFarmer', May 22, 2013
    Probably clogged. Do what the first poster said and blow through the pipe. If you don't have a screen it's pretty easy for some small nuggets to clog it.
     
  5. #5 DayJaVu, May 22, 2013
    Last edited by a moderator: May 22, 2013
    Either you packed it too tight, or it's clogged. Come on guys, clean your pieces, don't just unclog them with a paper clip. Nobody wants to take a hit out of a nasty-ass, resin clogged pipe.
     

Share This Page