hello: Ok so I've done a real good job with this room it's just about done being mudded I used green board gypsum. I have three 1000watters all on 8" air cooled duct wired on a 220v system using a 4000 w lighting controller. The room is 12 x 6 x 7. I'm building my own flood table using plywood for the bottom 2x6's for the sides and lining it all with pond liner thats rated for aquatic plants and fish. My question is how do I make the best use of my space. I was thinking of building the table to be 12 x 3, essentially using half of the room for my flood table and the other half to work in. Would this be a waste of space should I build my table bigger. I've spent thousands on setting this up and I need some return. I have a lot of experience with the growing part. I just need design help.
oh and I'm probably going to run a scrog (screen of green) to maximize yield and keep them short. FOr the flood table should I just fill it with hydrotons?
if your anywhere in fl i have many designs no money big dreams and cant do anything so put some heads together let me know