Need Help With Homemade Glass Bong

Discussion in 'DIY and Homemade' started by Raul531, Jun 13, 2013.

  1. today i found this small glass vase, and thought it would make for a cool little bong, so i went online and found a 14mm glass downstem but i dont know what type or size drill bit i should get. i was going to use a rubber grommet too

     


  2. Sent from my HTC Inspire 4G using Grasscity Forum mobile app

     

    Attached Files:

  3. This is how I did it, hope it helps :)
     
     
    http://www.youtube.com/watch?v=1wotpK5hVss
     
  4. http://www.grasscity.com/img/products/products_water_bongs_adaptors_2.jpg
     
    Maybe something like this only bigger sized for that opening?
     
  5. That sounds like a good idea. Where would I be abpe to buy that and how much? Thanks

    Sent from my Desire HD using Grasscity Forum mobile app

     
  6. #6 Raul531, Jun 17, 2013
    Last edited by a moderator: Jun 18, 2013
    That was quick i think i will be buying that, thanks for the video
     
  7.  Honestly I would just make it. Get a cork or a rubber plug big enough to fit the opening, poke 2 holes in it. 1 for the funnel and downpipe and 1 for the hose. stick a pipe onto either a bought funnel/bowl or like a 1/2" socket and stick the bad boy through, you can get tubing for the hose from places like home depot.

    If you want to buy something like that just search around bong sites, most of them will have em, if ur having trouble finding 1 let me know ill look through my links and find it
     
  8. I am in the process of making one with this. I am going to use a drill press, tub with water, and a tile/glass drill bit.

    - J-Fal (Your music junkie toker)

     

    Attached Files:

  9. looks good. Please post pics when when done

    Sent from my Desire HD using Grasscity Forum mobile app

     
  10. Will do. I wanna see yours when you finish as Well.

    - J-Fal (Your music junkie toker)

     
  11. hoperfully i get it done soon

    Sent from my Desire HD using Grasscity Forum mobile app

     
  12. hoperfully i get it done soon



    Sent from my Desire HD using Grasscity Forum mobile app




    </blockquote>
    Well I might grab the bit today after work. So I might have it complete this weekend. :D

    - J-Fal (Your music junkie toker)

     
  13. There is a much easier way to do this.
     
    Buy
    1. Purchase the correct downstem; such as this. Or anything like it.
    2. Get a corresponding drill bit (for the downstem listed above, you need this.) Can be found at a hardware store, but this is the cheapest
    3. Get a bowl piece. For the downstem, you will need any 18mm glass bowl. This can be purchased at your local head shop.
    4. Purchase a 5/8 inch grommet. Can be found at any hardware store.
     
    Build
    1. Place the vase in a sink secured by a towel, with the faucet running water over where you want to drill
    2. Drill a 5/8 inch hole wherever you want the bowl to sit
    3. Rinse out, and place grommet in the hole
    4. Wet the downstem, and slide into the grommet
    5. Place the bowl into the downstem
     
    All that's left, is to smoke!
     
  14. I think i will try that when i have time

    Sent from my Desire HD using Grasscity Forum mobile app

     
  15. First bro, practice drilling holes in other glass bottles, so you don't learn not to do something when drilling the vase that you don't want to break. Don't learn the hard way on your vase. 
     
Loading...

Share This Page