Need help adapting oil rig

Discussion in 'Bongs, Dab Rigs, Bubblers, Water Pipes' started by Pabbbz, Nov 2, 2013.

  1. #1 Pabbbz, Nov 2, 2013
    Hey guys, so I need a bit of help. I have a 10 mm Grav Lab Nano oil rig. I recently broke the dome to it and it's very difficult to find a inexpensive replacement dome since 10mm isnt a very common size.
     
    I have a 14mm domeless nail and was wondering if there was some way to possibly wrap something around the 10mm male end of the oil rig in order for it to be wide enough to fit the 14mm domeless nail.
     
    I need something that would be safe to use in regards to using the torch and inhalation.
     
    Any help would be amazing.
     
    Oil Rig -  2013-11-02 10.29.08.jpg 2013-11-02 10.29.48.jpg
     
    Domeless Nail - 2013-11-02 10.29.32.jpg 2013-11-02 10.30.31.jpg
     
    Broken Dome -  2013-11-02 10.35.00.jpg

     

    Attached Files:

  2. #2 guest0934092, Nov 3, 2013
    I wouldn't trust anything but glass touching something that gets as hot as a nail. Have you tried looking around for an identical replacement? I know i've seen the grav labs domes on 420 science's website. Possible high priority or aqua labs. OregonGlassBlower might have a 10mm also.


    Sent from my pager in 1984
     
  3. #3 AfganiKush, Nov 3, 2013
    I doubt it would be air tight, but hemp wick wouldn't release any harmful smoke/fumes.
     
  4. #4 xxOgkushxx, Nov 3, 2013
    i already told you this get a 14mm to 10mm adapter. flip it upside down. ive done this on my rig before from 14mm to 18mm
     
  5. #5 Pabbbz, Nov 4, 2013
    This actually worked, I wrapped it around twice and it was almost perfectly airtight.
     

Share This Page