Food and Drug Administration (FDA) Disclosure:

The statements in this forum have not been evaluated by the Food and Drug Administration and are generated by non-professional writers. Any products described are not intended to diagnose, treat, cure, or prevent any disease.

Website Disclosure:

This forum contains general information about diet, health and nutrition. The information is not advice and is not a substitute for advice from a healthcare professional.

My Weigh Triton T2 scale problems

Discussion in 'Apprentice Marijuana Consumption' started by OuTLaW1986, Apr 3, 2010.

  1. #1 OuTLaW1986, Apr 3, 2010
    Last edited by a moderator: Apr 3, 2010
    Just got the Triton T2 scale (0.1g, 300g max capacity) yesterday and its giving me inaccurate readings, and it SOMETIMES doesn't give the same readings if I were to weigh something in different corners. I tried test weighing a 50g calibration weight and sometimes it will read 50.1 and sometimes it will read 50.2 or 50.3 (especially if I tried weighing it on the corners of the scale). I also tried weighing a dime (coin) and it weighed out to 2.3, which would be the correct weight of a dime. WTF? I thought this scale comes calibrated? I did make sure I got the scale on a leveled area too. Does this happen to anyone else?
     
  2. #2 PieceMaker, Apr 3, 2010
    your scales fine. don't worry about it. mine does the same thing.
     
  3. #3 fyasko808, Apr 4, 2010
    I work at a vet hospital and we have a similar issue with our scale, it does something very similar to yours. And we weigh out meds and the vets are okay with the bit of drift that we have and similar to yours. As a scientist, weigh it three times and take the average, that will give you the approx. weight and honestly that is what you are going to get regardless, you will always have drift unless you havce a driftguard.
     

Share This Page