My way of drying in my cabinet. Take a look.

Discussion in 'Harvesting and Processing Marijuana' started by TheHappyHerbMan, Aug 9, 2013.

  1. So I have made a drying cabinet for my product and I thought you guys might like to take a look. Take about a day to make and about 200 dollars worth of material from a hardware shop (maybe be able to get it cheaper from a tip shop or something). Very simple, you just hook up a small 4" fan to draw air in through some holes around the bottom and blow it out through a carbon filter if smell is a problem. Just keep the room temperature reasonably warm and not humid. Take the weed out every night or something and put in a sealed bucket or drum to remove moisture from the stem and put back in the cabinet until you can easily snap a stem.

    Let me know if you would like to know how to make it.
    image.jpg
    image.jpg
     
  2. What kind of air filter did you use?
     
  3. The air will go out through a vortex fan then through a Can-Fan carbon filter. Just passive intake through a series of holes drilled around the bottom.
     

Share This Page