Just got my A/C in and doesn't fit my stem...lol

Discussion in 'Bongs, Dab Rigs, Bubblers, Water Pipes' started by greenbrad420, May 19, 2011.

  1. did you request a 18.8 on the a/c? because that bong you posted is a 18.8. If you have a 14mm a/c then just get a downstem that is 18.8 that goes into the bong and 14.4 where you put the a/c
     
  2. Or you can get a ground glass reducer that you can stick into your 18.8mm stem that will allow it to take 14mm joints. Either way you will also need a 14mm bowl for the ash-catcher, or an expander piece for the ash-catcher so it can fit your larger bowl.
     
  3. This. And just get a reducer for the bowl if you still want to use your 18 mm bowl, or just buy a 14mm bowl.
     
  4. #5 greenbrad420, May 19, 2011
    Last edited by a moderator: May 19, 2011
    No it's way bigger. It's like my stem is to small, the stem must go from a 18 to bore out into a 14.

    I did request a 18.8

    If I put my bowl in right now, it's like sitting inside the A/C female joint

    I'll take pics..second!
     

Share This Page