so i just setup my hydro hut its not a brand name hydrohut but an aftermarket one from ebay i am def pleased with the quality only came with one side of a page instructions on how to setup but nothing about the cieling grid it came with: 2 straight pieces 2 pieces with 2 small knotchs and 2 pieces that are bent at an angle i understand that the knotchs are for the 2 other rods to sit in flush but where do the 2 angled pieces go the thing that is confusing me is that i have them all in right now one of the angled pieces is inthe middle and the other is about 2 inches from the right wall on the right and left sides - there are two holes evenly spaced apart and on the front and back - there are two holes that are evenly spaced so when i connect the 4 straight pieces they sit flush with the knotchs and everything WHAT I CANT FIGURE OUT IS are the two bent rods supposed to be : one going front to back across the middle / and the other front to back about 2 in from the right wall? please help.... and are these lil rods gonna hold