so i broke my glass piece a few weeks ago and since then, i built a socket with 2 bals of aluminum foil and a highlighter on the other end into a coke bottle to make a bong. the piece has clogged up a few times and i dont want to smoke on aluminum foil anymore. and the end of the highlighter is covered in res or burnt. Whats some good ideas to make a safe piece that doesn't utilize plastic until i can guy my new glass?
Make a gravity bong then bruh all you need is 2 bottles water and a metal socket for the bowl + they get you high AF from a small ammount of weed..
Unless you're a glass blower you're not gonna make a decent peice, just don't smoke or suck it up and smoke through plastic till you can get a glass piece, failing then smoke a joint
Check out my forum called "Gatorade bottles." My downstem is a metal flashlight. I just took out everything from the inside like the batteries and the spring and the button and the bulb so it's just a hollow metal tube. The end where the lightbulb goes in is wider so that is the end that I used as the bowl. Since its a big hole though I put copper mesh in a bowl shape. The bowl is basically the same as one in a metal pipe and the whole tube is metal. It's all homemade and I think it's pretty good but all the responses I got on my forum were pretty crappy. Sent from my SM-J700T using Grasscity Forum mobile app
I really like the solution @Parkour4LIFE_26 came up with. Just to throw another idea into the ring, wooden pipes. Get a small piece of untreated wood, with a drill you can make a chillum (straight thru the wood, carve out the bowl end with a knife if desired), or even a wood pipe (drill from 2 different sides that intersect at a right angle.)
Ive made a bong out of a glass bottle before, its best to drill it with a diamond tipped drill bit but i regular bit will work as well but you need patience and go at it slowly. make sure to keep the place you're drilling wet at all times so it doesn't shatter. message me if you're interested and want more in-depth directions
With some hard wood, a saw or two, a drill, and various rasps and files you can make one of these... 20160923_194103 (2) by mv5 posted Jan 12, 2017 at 8:11 PM 20170107_183437-1 by mv5 posted Jan 12, 2017 at 8:22 PM 20161222_234036-1 by mv5 posted Jan 12, 2017 at 8:16 PM
if the joint and enough of the tubing of your downstem survived, you can just puncture that onto carved out fruits like a melon and have a bong that way. you can also push it inside a apple or banana the same way you would the regular way, but now you would have a glass joint+bowl and fruit only pipe, so no contaminants or bad taste at all.