Growing With Fluro

Discussion in 'Growing Marijuana Indoors' started by max11max, Aug 30, 2006.

  1. Hi All,
    <O:p</O:p
    This is my 1st post so please be gentle :)

    I have been growing for about 5/6 years now, only small crops and of very good quality. I have always had heat issues with my 600W metal halide in my small grow room and would like to know if anyone has used the new 250W fluro tubes. I can get them in my grow shop in BLUE and YELLOW for VEG and BLOOM.

    I was thinking of getting two of each and giving it a go but at £200 for all four I thought I'd post here and see if anyone has had any luck with them.
    <O:p</O:p
     
  2. There are DOZENS of posts regarding this exact same topic! Look for posts by Num. He seems to have the most fluoro experience in the group.
     
  3. Thanks 4 that.

    Will get the spy glass out.

    Max
     
  4. pm'ed u m8 - hope it's helpfull.
    I use the 200w cfl's from http://www.theonlineelectricalwholesaler.com - at £30 each for either type.
    The 125w are about £18.
    They are very well packaged so don't worry about them getting broke in the post ;)

    They don't get nearly as hot as hps / mh, but ur contemplating 800w & u will need ventilation (at the top of ur cabinet if ur using 1)
    I use 2x4" filtered inlet fans, 1x8" filtered extractor & a 12" oscilating fan for hurricane effect :D
     

Share This Page