3'8" - 2' - 6'She is almost done.. just got to clean iit up a bit..Will be using a California lightworks solarflare in there.http://s18.postimg.org/oh7azusqv/IMG_20140510_204339.jpghttp://s7.postimg.org/n6cnr0qgp/IMG_20140510_204206.jpg
Sweet box. Like how you made everything very accessible on one side, looks clean, and tidy. Great ventilation too. Pantyhose or even better carbon filters for a garbage can or litter box over your intake to keep dust and bugs out. Now, speaking from experience.... Pull that mylar out, and paint the entire interior with Kilz white primer. Do at least two good coats, and allow it proper time to dry. You want to prime the wood to resist mold and mildew from all the humidity, and the white will give you about a 92% reflection rate of soft, even light. Mylar might give you an added few percentage points, but the light is going to bounce around very unevenly. I would also recommend caulking the interior seams before painting, really helps with light leaks and negative pressure. LED's vent heat into the box, I find it's beneficial to keep the carbon filter close to my led, so the heat has little chance to build up. Good luck!
IM going to start with 4 plants... maybe move to six, depending on the performance of my light, Yeah the mylar was a pain in the ass.. had no problem ripping it down.. Update: