Final plan confirmation help

Discussion in 'Grow Room Design/Setup' started by TheArrow, Apr 27, 2003.

  1. Alright, I have decided, I will have 3 pieces.
    piece 1 3 x 4 ft 1/8th inch * 4 ft 1/8th inch,
    piece 2, 4 x 4 ft wide by 2 1/2 ft tall,
    piece 3, 4 x 4 ft wide by 4 1/2 ft tall,

    use the first piece as a base, surround by all of pieces 2, cover with a piece one, surround with piece 3 , cover with piece one.....

    making it a cabinet 4*4 and 7 feet tall split in 2, the small 2 1/2 feet for vegging w/ flouros, and the bigger 4 1/2 ft tall one for flowering with a 430 w hps.

    I will have both on different timers, and would like to make all the pieces I attach for side pieces removable for maintenance..... to do that, the extra 1/8th of an inch will be used for hinges, so I can just pull out the top part and swing it down.

    Will it work???? and should i SOG or just grow fewer, bigger plants.... (doubt it with height... I added the extra 6 inches for container/lights,

    then once it will be done, I will insert a few fans on top of the box and some small holes at the bottom so air flows upward, and because of it's proximity to my ceiling the light wont go in.....
     

Grasscity Deals Near You

Loading...

Share This Page