crankz's corner

Discussion in 'Hydroponic Growing' started by crankz, Apr 7, 2015.

  1. I wish I could play an instrument
     
  2. Hell yea sounds like fun
     
  3. Don't have any likes but Hellyeah man! Beat em up haha

    :metal:
     
  4. Just got home.
    Does this toothpick make my stem look fat? [​IMG]


    image.jpg


     
  5. God damn man! The lighter makes it really noticeable. My brother was like hey instead of using a full size lighter one of these times you should fuck with them and use a mini bic lmao make everything seem huge.

    Beautiful man! Beast of a stalk
     
  6. lol A mini bic would make these stalks looks monstrous! Heck, they already are...
    Pretty crazy how stout they are.
    Gotta hold the topside up!


    I'll get to that this weekend.
    Have a good one!
    I'm off like a prom dress...
     
  7. #867 gusenator, Aug 7, 2015
    Last edited by a moderator: Aug 7, 2015
    Lmfao nice man

    You have a good weekend too brother

    :wave:
     
  8. Is that a Gibraltar rack crankz?

    Man you got an outdoor Ed stock there my man. That's nice girth
     
  9. Yeah, I think it is. At least most of it. It belongs to my guitarist friend.
    He don't play them though. Well, he hits em now and then, but he's no drummer.
    They're there for any drummers that show up at his basement.


    These stalks are pretty beastly. The ladies like the girth!
     
  10. Porn plants.
     
  11. I'm dragging ass today! I was pretty lit last night...
    Come on 5:30!


    Happy Friday ya'll
     
  12. Stem p0rn

    Damn...just DAMN! The hole in the middle of that stem is probably thicker than most of my plants! Well done, amazing
     
  13. Take an easy today Crankz my man, don't you know it's Friday man!
     
  14. Haha thanks man!
    You know it! It's Fuckoff Friday!
    The hard part was waking up and getting here...


     
  15. Just put girlscout cookie haze in paper towel method....exactly 2 hours later she cracked open showing taproot....amazing!... I love my vitamins formula I use....try it for yourself...get a Tupperware container I use a cool whip container line the top with reflective aluminum tape keep air tight, yes air tight make sure your paper towel is sqeezed out of liquid just slightly damp with two drops from a pipette when your finished on the seed. Now place your container under some t5 I use 2 footers about five inches below the light this is your perfect temp and warmth no hit burning heat mat...water here lays the other key...get your pipette out grab your red b1 thrive alive grab your super thrive and your anti wilt in a half liter of perfectly ph ro water add 1/2 ml of all three...this is the stuff u will soak your paper towel with and wet your seeds with. And boom your done...keep a fan on It to balance out the heat 24-29 celcius day and ambient heat. Open once twice a day if you like for oxygen
     
  16. Cool! I keep it real simple. All I use for seeds is tap water.
    I pH condition my rockwool though.
     
  17. Crankz! What's up buddy, ya didn't get a heat stroke yesterday did ya.
     
  18. Haha... no man. All was good. I did pass out pretty early last night though. I guess it all caught up to me. Feeling pretty good today!
    Got my boy this weekend. So, the room is stealth mode...
     
  19. My boy is off playing with neighborhood kids, so I got a minute to play too...
    Messed with the veg area.
    Got a 13gl trash can for a res instead of the tote I had under the drain table. The tote was just too bulky for me. It was fine when it was hidden under the table, but not sitting in the corner. So, yeah... trash can it is.


    IMG_1622.JPG


    IMG_1627.JPG


    IMG_1628.JPG


    Since I dropped the table down, I needed a way to catch and return the runoff to the res. Hello ebay, and the ordering of a condensate pump to catch and pump back to the res.


    IMG_1630.JPG


    I also covered the rockwool w/Hydroton and placed the watering lines/drip rings... whatever ya wanna call em on the new moms.


    IMG_1626.JPG


    Like I said earlier, I'm using some ideas from Ironhead's method for success thread.
    Basically the idea of reusing the medium, and some of the products he uses. Well, one. The VAM. The clones went straight into these pots, so I just sprinkled some into the hole I made for the clone to sit.
    I use gh flora, but all 3 parts. No modified Lucas, Epsom salt, or roots excell. I do use GH cali magic, and rapid start though.
    The Home Depot here doesn't stock the Total Pond barley extract, But Menards had Tetra Pond brand. So, that's what I got. I may have to watch how much N I give them, since the barley will be converting the old roots. Will see...
    I had twisted and yanked out the stumps that were left from the 4 moms I culled way back when. They sat for a while first though.
    I'll let these do the same. They are the ones I just chopped.


    IMG_1632.JPG


    Got extra clones of everything still in the cloner just in case. Doubt I'll have issues though. There's also two #4 clones that will be next for the veg buckets. Also two #15 clones that will go E&F in the closet, if I get off my ass and get it ready. I may end up taking a couple days off work to get some stuff done. I don't wanna waste these clones, nor do I want to wait till the mothers are big enough.
    The struggle is real!


    Will update the flowering area tomorrow night most likely. If I'm up to it after I take my boy back home.
    I always hate that part... [​IMG]


    Hope everyone is having a wonderful weekend!






     
  20. Crankster,


    Sup Brotha Crank. All is good on this end. Had a hell of a fight today with the active intake in the office room. Nothing quite wanted to go my way I did however end up getting all the active intake ventilation done (including the speed control). All is insulated and sheathed. The 6" duct line is behind the pony wall and now affixed to my actuall vents like they are supposed to be. The intake fan is housed in a box which is insulated 24x24x24. I also took some standard garden house and cut 4 - 2" spacers and use them for rubber vibration bushings. I was hoping that I would have got the RO filter setup and installed today, but I fell behind. I'm just gonna place that on top of the 2'X2' box that houses the fan. Long as there is no leak all should be good, Bahaha.
    I'm pretty certain that after I get the RO filter setup, Im clear to finally open my grow tents and do a dry layout. This way I can get an Idea for the exhaust fan setup to the other side of the attic.


    To be honest, I'm pretty burnt out. I have been workin like a Mfr lately and all the days off have been tied up with setup and building the office. I know its worf it, but fk I'm ready for a break, LoL. I told you the TurboCloner came in last week with my T5s so I think Im gonna make a little something for that area. I'll know more once I get the Tents setup.
    What else? Gonna pull the trigger like tomorrow or first part of next week on those lights. I'm still liking the 2 - 450s per. GuessWhat is right on everything he says about the 3 - 300s, but I guess I just wanna be simple. I have this new st00pid bank care that I have to activate. Ima let the ol' lady use it to buy some shit she wants, if it works for her I'll go ahead and score my lights and a chiller I s'pose.


    I'm kinda just ramblin' to give you something to read and I'm a lil sparked on Coffee. Got some new fkn Keurig550 toy and I've been beatin' the hell outta the Caramel flavor. I have every intention of doing a shit load of work like I did today, prolly nuffin' will happen. :) Naw, I'll do something (even if it's wrong) I'll do something.


    Hey look man... I like your fkn trashcan. I might consider doing that setup too. It's kinda like the way I feel about other shit, build UP not OUT. Ya know, use more Cubic Feet and less SqFt. Everything you showin' lookin' damned Fine.


    Ima check you onda flip side. Fk this typin. L8
    Linux


    PS. ShoutOut to the Koo A$$ growmies followin' Crankmeister's thread. RockOn!
     

Share This Page