Food and Drug Administration (FDA) Disclosure:

The statements in this forum have not been evaluated by the Food and Drug Administration and are generated by non-professional writers. Any products described are not intended to diagnose, treat, cure, or prevent any disease.

Website Disclosure:

This forum contains general information about diet, health and nutrition. The information is not advice and is not a substitute for advice from a healthcare professional.

Cleaning a one hitter

Discussion in 'Apprentice Marijuana Consumption' started by Jdogtulsa, Jan 26, 2011.

  1. #1 Jdogtulsa, Jan 26, 2011
    Any tips? Anything I can just soak it in? I have denture cleaner for my retainer, would that work? Thanks bros
     
  2. #2 Iluvatar, Jan 26, 2011
    Isopryl alcohol and salt mixture. Put it in a ziplock back and shake it around for a minute.
    Then do it again if its not completely clean. Just make sure you rinse it out with water afterwards
     
  3. #3 SsmokeWeed, Jan 26, 2011
    lol, rubbing alcohol and salt in a ziploc bag and shake for about 3 minutes, wash off in a sink.
     
  4. #4 Jdogtulsa, Jan 26, 2011
    Sweet thanks guys. How much salt vs. alcohol
     
  5. #5 Iluvatar, Jan 26, 2011
    If you had like a cup of alcohol, then you only need about a teaspoon of salt. You can't really put too much salt tho.
    Try to find the highest percentage isopryl you can find. Around 90% works best, but even the 70% works
     
  6. #6 oldskoolgrower, Jan 26, 2011
    Pipe cleaners are good too for when you don't need to really clean it completely. You an also make a reamer out of a straightened piece of a coathanger.
     
  7. #7 Jdogtulsa, Jan 26, 2011
    Again thanks for the replies. I do use a coathanger, but thats only for after I smoked, just to get the ash out. My hitter is a ceramic cig and its just BARELY too wide for the coat hanger to clean the inside.
     
  8. #8 Iluvatar, Jan 26, 2011
    Yeah I've done the coathanger thing a bunch of times :smoke:
     
  9. #9 Jdogtulsa, Jan 26, 2011
    Just put it in a bag with like a small cup of 70% rubbing alcohol and salt. I shok it and am letting it soak.
     
  10. #10 Iluvatar, Jan 26, 2011
    If you can't get it completely clean find something to stick in there and scrape all the now softened resin out. Then rinse it
     
  11. #11 xhephaestusx, Jan 26, 2011
    Remove the fuzz from 2 qtips, push one thru with the other, clean as a whistle! Cake!
     
  12. #12 Jdogtulsa, Jan 26, 2011
    I fucking love you guys. Been a pain trying to clean that shit with a knife
     
    • Like Like x 1

Share This Page