Do you have a pH meter and a PPM meter or you just have one of them Sent from my SM-G935T using Grasscity Forum mobile app
If I have pH meter and u are in soil. Take a large shot glass of soil from plant and the same amount of distilled water. Stir stick pH and ppm meter in there. It's called a slurry test. It will show u what ur true pH is and if they are eating by the ppms if u have a ppm meter Sent from my SM-G935T using Grasscity Forum mobile app
Sorry out both in cup stir and than put meters in there Sent from my SM-G935T using Grasscity Forum mobile app
Before that. He instructed on how to perform a slurry test to find your soils ph level. What you saw was a correction. Put them both in the cup and stir...
Take a shot glass of your soil and a shot glass of distilled water stir it up in a cup and put your pH meter in there if you're in soil you should be running between 6.3 and 6.8 Sent from my SM-G935T using Grasscity Forum mobile app
If it's somewhere off you will need to either ph up or pH down to correct your water and feeds. When you make up feeds you want a pH after you've mixed everything and make sure it's somewhere between 6.3 and 6.8 Sent from my SM-G935T using Grasscity Forum mobile app
S orry. Somehow I missed this post perhaps more info. I am getting distilled water as we speak. My water routine is to add nutes then add temp controlled water then ph to 6.5.... I was thinking nte burns because I upped the nutes last time
Ok I did the slurry test. The pic below shows dead on pH. If there are next steps I’m ready. Other ideas also. Oh and thank you all for your responses thus far. Here’s the test pic.
What is the PPM's? Could be nute burn also. Could be you need some cal/mag added to the regular nutes when feeding
so what was ur number is that 6.58? if so perfect. now u know how to check. if u get a ppm meter than that tells u if ur plants are eating or if hungry so u wont guess anymore