Building a beer pong table (pictures)

Discussion in 'General' started by Omega369, Nov 14, 2014.

  1. I have a lot of free time at work and access to tools and supplies. Got bored and decided to build a beer pong table without spending any money by using only work supplies.

    Step one:
    Found this piece of wood near the garbage compactor. Took the folding legs off an old folding table.
    ImageUploadedByGrasscity Forum1415930500.410183.jpg

    Step two:
    Chop the wood in half, sand it down, clean and apply primer
    ImageUploadedByGrasscity Forum1415930714.245620.jpg
    ImageUploadedByGrasscity Forum1415930755.874820.jpg

    Step three:
    Measure out the triangles on both sides and tape them off
    ImageUploadedByGrasscity Forum1415930829.461818.jpg
    ImageUploadedByGrasscity Forum1415930847.059293.jpg

  2. Step four:
    Apply white paint for triangles, and blue paint for the rest
    ImageUploadedByGrasscity Forum1415930972.191563.jpg

    Some more tape, paint, hinge and whatnot
    ImageUploadedByGrasscity Forum1415931190.359581.jpg
    ImageUploadedByGrasscity Forum1415931206.696193.jpg
    ImageUploadedByGrasscity Forum1415931250.072817.jpg

    Two coats of polyurethane
    ImageUploadedByGrasscity Forum1415931265.945151.jpg

    Tomorrow I'm going to hopefully finish it.

  3. Thats so cool! could play beer pong at work now.
  4. Best GC user hands down.
  5. Never played this game

  6. Whoops forgot about this thread

    Here are some finished pictures

    ImageUploadedByGrasscity Forum1419096718.263784.jpg
    ImageUploadedByGrasscity Forum1419096728.997189.jpg
    ImageUploadedByGrasscity Forum1419096739.881636.jpg
    ImageUploadedByGrasscity Forum1419096764.266848.jpg

  7. Pretty nice table, bro.

    Although, Id still destroy you on it. :p

Share This Page