If anyone has steps to make a cloner let me know. I have an idea of what Im going to do, but want to see if someone has a better or cheaper way. Also supplies needed to build it.
get an aero garden. snip a branch off ur plant and stick it in the aerogarden, point leaves towards light, wait 2 days, enjoy.
rumpleforeskin has a great step by step guide for one. Check the DIY section of grow room set ups. If you cant find the cloner thread, find another one of his. The link is in his sig.
you need a good submersible pump, get a size bigger than you think you need. The 15 dollar one from HTG works well for me. You need piping or tubing. I used the 1/2 landscaping black plastic stuff, but if my home depot was better stocked I would have used 1/2" PVC. You need nozzles. Home depot has some that also have flow adjustments on them, or you can pick up some from the hydro store. You will need a drill and 3/8" bit, I use a smaller bit for pilot holes. attach your tubing together, screw in the nozzles and hook it to the pump and you're done. The nozzles are just a little tricky. If you use 330's or 360's you need install a couple, test, and repeat. So that you make sure you have enough pressure. If you use mostly 180's, it's not that big of a concern. Good luck, have fun.