4th run just came to an end, upgrading from (2) 1,000w parabolic hoods and two LEDs to (4) 1,000w DE Gavita’s and Two 600w platinum LEDs (two phase, grow and bloom if I can keep heat down they will be on grow+bloom. Here’s the new beauty’s My 4th run best yet check it out! Two 600w LEDs and Two 1000w DE HPS Flower!!!
The lady’s in there veg room growing big and strong as I get there flowed room ready. Target date is the 10th and I’ll give them a few good days till trip to 12/12 (trip goal date of 14th) which would give them a finish date of roughly May 20th. Going to be a great one, shooting for 1.1g per watt this run, I’ve fallen drastically short in the past runs but I haven’t had the fullest room I could and I had some problems that I’ve since fixed or am going to before they move over to the flower room. Co2 was one, got co2 tanks. Heat was another, got ac installed. Timer issue, going to install a 24h breaker box timer. Males in the batch had to kill 4/11 off, I cloned a female. Pots too small. Upgraded pots from 5g to 20g and Increased veg from 9wks to 11. Doubled lighting in the veg room and added red spectrum bulbs. Also adding 4’led tub bulbs to replace some dim ones tomorrow. My 4th run best yet check it out! Two 600w LEDs and Two 1000w DE HPS Flower!!!
I’m looking at using co2 do you have any pics and a little more info on what your using for co2 please
Co2 tank with a regulator, there’s calculators online for your room size for how much you set your regulator at My 4th run best yet check it out! Two 600w LEDs and Two 1000w DE HPS Flower!!!
I’m not looking forward to that either, will be worth it My 4th run best yet check it out! Two 600w LEDs and Two 1000w DE HPS Flower!!!
Getting-closer, ran out of eye hooks and rope ratchets My 4th run best yet check it out! Two 600w LEDs and Two 1000w DE HPS Flower!!!
There all moved over, now I need to finish “transplanting” in which I’ll just fill a 20 gallon pot with perlite in the bottom and throughout (10%) and fill the pot 90% then place the plant pot and all on top and fill the rest of the smart pot. But as soon as I get that done I’m going to trip to flower. Likely a few days before target date (TD). The rooms extremely full already. View attachment 2414617 View attachment 2414618
From my 4th run... 5th Run. 4,750w flower (4) 1,000w DE and (2) 600w LEDs 5th Run. 4,750w flower (4) 1,000w DE and (2) 600w LEDs
Absolutely, going to stake each branch down to a set height but I’m dealing with this right now got a little over zealous with the watering. What do you guys suggest low light or full blast when there overwatered?? There in a vegetative state still 5th Run! (4,750w) HPS/LED 5th Run. 4,750w flower (4) 1,000w DE and (2) 600w LEDs
I’m thinking just don’t water them until they dry out lol. Leave lights how they have been. I used a lot of perlite so I pretty much can’t overwater.
I bought a size huge bag of perlite today going to use a decent amount from here on out as overwatering has always been one of my problems 5th Run! (4,750w) HPS/LED 5th Run. 4,750w flower (4) 1,000w DE and (2) 600w LEDs
Rh down and fans to the pots. Evaporation is your best friend right now. Getting rh to 40% will require you to run a cool room, somewhere in the 60f range if you want to stay in good standing with the VPD charts. Sometimes, temporarily chucking the charts to remedy a short term issue is, not only constructive, but warranted. I believe this is one of those times - IMHO
It turned out to be poison ☠️, I changed from store bought refilled water to home r/o water and that was the problem, had to overwater them to try to push out the chlorine, I gave them a foliar feed since they weren’t up taking, got the dehumidifier set to full blast, fans everywhere and decked up the plants so there a little off the ground 5th Run! (4,750w) HPS/LED 5th Run. 4,750w flower (4) 1,000w DE and (2) 600w LEDs
Much better to find that out now rather in flower,for sure. Good for you that you nipped in in the bud - so to speak
I would give an updated photo but every time I try to I get an error for the last two days. Anyone else’s experiencing this?? 5th Run! (4,750w) HPS/LED 5th Run. 4,750w flower (4) 1,000w DE and (2) 600w LEDs