Dismiss Notice
Food and Drug Administration (FDA) Disclosure:

The statements in this forum have not been evaluated by the Food and Drug Administration and are generated by non-professional writers. Any products described are not intended to diagnose, treat, cure, or prevent any disease.

Website Disclosure:

This forum contains general information about diet, health and nutrition. The information is not advice and is not a substitute for advice from a healthcare professional.

1st BHO Run. PLEASE HELP

Discussion in 'Marijuana Consumption Q&A' started by tjfisher3, Apr 5, 2019.

  1. So Im doing my first BHO run and i blasted a QP of some really quality shake. I ran it through a stainless steel caliextractions tube with 11x refined Neon brand butane. Blasted into pyrex, gave it a 30 min water bath, scraped and put on silicone mat, stuck in vacuum pot with pot on top of electric griddle. The griddle is set to 115 degrees farenheit and vac set to -30. It looked great for the first day, beautiful golden color and transparent. Day 2 comes around and everything looks good so i do my first flip. I got a ton of tiny bubbles and from what Ive read its most likely air bubbles so i wasnt worried. On Day 3 my slab was stable and looked good so I tried a dab. I couldnt even finish the dab it was so harsh. I turned heat up a little bit on the griddle and instantly got a bunch of big bubbles and even a little more “muffin” going. The slab has now darkened, ive lost what seems to be half of my yield that i started with, and after another day of purging on higher heat it still taste horrible. Does anyone know why I either A. Cant get the butane out of the wax at 95-100 degrees or B. Why the wax tastes so harsh. Im about 1000 dollars invested between equipment and material and do not wanna lose this product. Any advice would be greatly appreciated.
     

    Attached Files:

  2. This is very dangerous and you will never get all the butane out using this method. That “wax” is unsafe to smoke. My advise is until you have enough money for a closed loop system and vac oven stick to something non combustible like a rosin press !!!!!!


    Sent from my iPhone using Grasscity Forum
     
  3.  
  4. Thank you for your reply first off but why wouldnt I be able to get butane out with this method? Basically the same as a vacuum oven. Vacuum and heat??
     
  5. How strong of a vacuum are you pulling and for how long
     
    • Like Like x 1
  6. -30 for 48 hours or so
     

Share This Page