Separate names with a comma.
It’s probably just some soldered crimps. Maybe an over current device but I doubt it. Your trying to make something like this? Sent from my...
Really what I meant was running cords from multiple rooms to accommodate a larger size grow in a tent. If your just running a small tent running a...
I’m not a fan of extension cords or surge protectors. Especially not in a grow room/tent/op. The issue is that you have is too much drawing on...
1920 Watts. My mistake
Also if you have equipment that runs for more than 3 hrs at a time (continuous load) like lighting, you should derate your circuit to 80% the...
Depends on the size breaker the outlet is on: 15a breaker will give you 1800w 20a breaker is 2400w Don’t forget though.... unless it’s a dedicated...
There ya go! Yea 6 wire would be your best bet and that 8 space panel would be awesome. You don’t need a permit for that either so your good to...
We are all here to help each other and bounce ideas off of one another.
Hey stiggy. I feel like the only thing that would have caused that was a loose connection. At some point someone may have spread the tabs on the...
So there’s a couple issues I see and a couple solutions. Looks like 10awg running into the garage. You have it on a 2 pole 20a breaker in the...
Good answer tbone. And thanks for the test 4 Alaska. If you must test my knowledge I’ll give ya this. 3 phase y is created by a transformer that...
Andy like reod said there will be enough “lift” in the cover to service drains and pumps and what have you Sent from my iPhone using Grasscity Forum
Cut an extra net pot in the top and just fill it to the top with hydroton. You would then use this as a way in. Then purchase a 120v transfer pump...
Hey guys. So I am a licensed electrician and I’ve been working in the trade for the last 20 years. I’m feeling generous and would like to help out...
Had another buddy come out and take a look and it’s been confirmed. Faulty regulator. Will be returning. Thanks for the help though. I def...
So the first pic is it connected tank off Second pic is the pinned gauge the second I crack the tank open the slightest Pic 3 is it then taken...
Will do. I’ll be home in about 4 hrs. I appreciate all the help Sent from my iPhone using Grasscity Forum
Right. And the regulator is supposed to only let a smaller portion of pressure through. So it should be the adjustment screw on the face of the...
so I just got a CO2 tank and active co2 regulator. When I first set everything up I attached the regulator to the base opened the valve and it...
Actually it is my friends stuff. My setup is doing just fine. I just didn't know what to tell him he should do in that situation bc it never...