Advice Needed on Cloning Successfully. Problems maintaining low temp and humidity.

Discussion in 'First Time Marijuana Growers' started by humbleboy, Oct 15, 2015.

  1. Hi,


    I'm doing my first every cloning. I have a humidifier box, but then I realized it was getting too hot (30C). So I decided to take them all out and just leave them in my tiny grow box. I spray water on the sides of the box, which enables the humidity level to get to 80%. The temperature seems to stay around 28C.


    Is this okay, or does anyone have any excellent recommendations on what I can do. My light is a 65W flurescent. I decided to turn off the fan, because humidity levels were not able to get to 80% with dry air coming in. Thank you for all the advice and help.
     

    Attached Files:

  2. Well you could take them out of the tent with a 24 hour cfl lamp over em.
     
  3. Sounds like your on the right track , keep the humidity up keep em moist and the most important thing I learned on my first( and only) clone run was , walk away, keep an eye on them , but let em do their thing, don't pot up until you get some decent root growth, good luck and keep us posted
     

Share This Page