I have been wanting to grow my own for a while now I finally got around to it. Currently I have 4 unknown seeds germinating but I will purchase better ones as I investigate which ones are right for me. Building Details: - Used old wooden cabinet 75cm Long x 75cm wide x 38cm deep - Mylar (I used a large stapler to staple it onto the wooden interior. - Wood strips for lamps - Drill screws etc.. - Four spot lights - Electrical wire + wall plugs. - Four small wheels - Power strips - Small sponge to place under the pump for vibrating sound reduction. Grow stuff - 3 Inch grow pots - Four Sylvania 25 Watt ( Says it equals to 125W) light bulbs 6500 K - 1450 Lumens - E27 socket - Four Sylvania E27 25 Watt ( Says it equals to 125W) light bulbs 2700 K - 1450 Lumens - E27 socket - Active Aqua Hydrofarm Air Pump 2 Outlets - Submersible Water Pump 250 ( for 25 gallons ) - Two 2 x 2 x 14 Air stones - Small 6 inch ckip on fan - Timer Nutrients - Rapid Rooter Plugs - Recipe for success formula - Lava rock - Need to get hydroton or similar. I basically first covered the interior of the cabinet in Mylar with a stapler and cut any edges out with scissors. I then drilled three 3 inch holes, 1 for electrical and 2 for air floor. I also added 4 wheels to the cabinet for easy roll around I may need, it also made it easier to work with since its heavy. I grabbed one of the wooden strips and covered it with mylar and connected 4 spot lights directly to the wood. I also did 2 electrical wire connections one to each spot light. I choose the spot light since it was easier to move and direct light towards the plants. It's not hanging but this made it easier to just stick up there. I put the cables so they all came out from the same side. I directed these towards the back and guided the cables with strips towards the bottom so they don't get in the way. I'm using 2 spray painted tubs with 2 cups but I may change that to a bigger tub and add a water pump for more water movement. I stapled mylar on the top of the tubs, however I left extra space that serves as side panels for more reflection from the bottom up. Hope this works! Added a small hook in the back for the electrical cable to hold it while I roll it around when needed. Terrible stealth Mode! Still Pending: - More stealth, light & pump sound. - Fans for airflow - Screens and light leakage from 3 holes. - Purchase correct type of seeds - PH Meter - Co2 I'm not done yet and still putting things together but this is what I got so far. If anyone has recommendations im happy to hear!\t\t\t\t\t\t