Carb Cap

measure it and see how big the head is, if a Highly Educated one will fit it I would just get one of those. or you could get one of those universal carbcap with multiple sizes. I think Vapenwiser makes one as well as some other, I dont really remember the other ones.

 

hmm do you know the grade on that titanium nail? im by no means a concentrates expert, but i would suggest you buy a nail and cap set....kill 2 birds with one big ass boulder.

 

You could also measure it and get a blower to make you a custom one depending on your budget

 

All good suggestions ^^

I will just add that the Omni carb cap will probably function the best on this nail because is sucks in air from the middle rather then the sides.

In reality just about any one that fits will work well.

Use a glass dish or anything else you can improvise with in the meantime


Sent from my iPhone using Grasscity Forum

 

For the meantime clean out that slide next to your rig and use that lol

 

Slides work perfect. Most well made 18mm slides are the perfect carb caps.
 
And if you break apart an old teloscope, and get a lens with a concave side. You just lay it on top. Enough air pulls in through the cracks around the side to still have enough flow, and the hits are so milky. And it's like a universal cap.

 

 
 
I did this because I don't like the glass carb cap dabbers and couldn't find a carb cap with out a dabber.  Lee Brodee hooked it up with a sweet little custom rasta wig wag cap, you can find him on facebook

 

You can find a suitable carb cap for your device here:
https://inhalco.com/blogs/guides/10-best-spinner-carb-caps

 

This is a carb cap from a Ditanium
Not sure if it will fit over the top of your set up
Maybe look for something similar
Possibly look for an adapter that gives you a 90 degree angle to work with for the cap
Not sure if a glass cap would be a good idea