I am setting up my first 4x4 tent with a 600w light. I've had alot of issues with temps in the past. Should I leave the exhaust fan running continuously? Or plug it into a temp controlled switch so it only kicks on when heat starts to build? I am thinking of using a 6in inline exhaust fan blowing directly up from the top of the tent. And 2 open vents at the bottom for negative air pressure intake. As well as a small fan inside to keep the air moving. The tent will be a veg room with 24 hour light and a minature ebb and flow table. Clay pellets will be the medium. Thanks
I have a very similar setup and chose to run my 6 inch exhaust 24/7. However, I also purchased a speed controller for the fan, and that has really let me dial in the temp as the seasons and ambient air temps change. Good luck! Sent from my iPhone using Grasscity Forum
Check out Just4Growers. a few good articles as you scroll down in various sections; to include ventilation and environmental control.
Hey, Yeah we have a tent with one fan. Problem is if a temp controller is used then the fan will turn off and your negative pressure is gone. We are considering getting a 4" to run constantly and put our 8" on a controller.