I have a wardrobe grow and can not think of a way to make sure the light doesn't get out I've tryed duct tape put when I open the doors again it comes off one side what could I use? I'd like a zipper door on it or something any advice is welcome My first official grow all advice welcome http://forum.grasscity.com/indoor-medical-marijuana-growing/1335682-my-first-official-grow.html
Any DIY tips? My first official grow all advice welcome http://forum.grasscity.com/indoor-medical-marijuana-growing/1335682-my-first-official-grow.html
Can you post a picture of your situation? Its hard for me to imagine what you would really need. I used weather striping and silicone sealant to get rid of light leaks.
Silicone sealant? never taught of that but heres a pic of my problem My first official grow all advice welcome http://forum.grasscity.com/indoor-medical-marijuana-growing/1335682-my-first-official-grow.html
Hey what do you have on the inside? Like reflective wise? You and put some of this stuff up (link below) and make it over lap the door so you have to close one before the other and it should be fine. One sides white the others black so it should black it out. http://www.amazon.com/Hydrofarm-ABWP1-Black-White-Polymer/dp/B004WI44LM/ref=sr_1_1?s=hi&ie=UTF8&qid=1415726823&sr=1-1&keywords=Black+%26+White+Poly+Film+5.5+Mil%C2%A0#
Cut a 6-8" strip for the top and tape it to the inside(not the doors) and cut the same for the bottoms and tape to the doors.
It's mostly the side of the doors have a gap when closed of about 1/4" I was going to use a zipper door made out of an old zip 2m long and a sheet of reflective sheeting I have I was going to cut it down the middle and line the zip up with it and duct tape it to the sides so I have a door in a door but no light can escape just have to try it now lol My first official grow all advice welcome http://forum.grasscity.com/indoor-medical-marijuana-growing/1335682-my-first-official-grow.html
okay black duct tape hopefully it works I will post either way lol My first official grow all advice welcome http://forum.grasscity.com/indoor-medical-marijuana-growing/1335682-my-first-official-grow.html
thanks for your advice man! My first official grow all advice welcome http://forum.grasscity.com/indoor-medical-marijuana-growing/1335682-my-first-official-grow.html
i used weather stripping for doors in your house to seal my cabinet. Also if the problem is the doors dont meet the frame evenly try just adding some cardboard (wood would be better if available) to make the frame the door meets thicker so the door has more to close against.
the cardboard might work for now. But I was thinking of something that I can use for the inside the doors I have a zipper but need advise on what to use as the door it will light proof the grow I was going to use a windshield sun reflector with a zip down the middle? or something like that? My first official grow all advice welcome http://forum.grasscity.com/indoor-medical-marijuana-growing/1335682-my-first-official-grow.html