Kief into activated oral oil

Awhile back, I was interested in making RSO with kief. I didn't find much information, but kept a copy of the Q & A<span> below from a forum (I apologize for not having the source). This is simply someone's take on making concentrate with kief. For what it's worth, here it is:</span>
\nCan Kief Make RSO?
Answer
I personally don't see the point in oiling kief/resin powder. If it is a decent quality resin powder then you will only be changing it very slightly. Depending on the amount you are using, you are likely to to lose a bit in the process, making the whole process uneconomical. If you've already got resin powder, I'd say just press that up into hash. When oiling it, you are only getting rid of the actual resin heads themselves which are a negligible proportion.
\nIf you do decide to have a go then it doesn't really matter what method you use, however, a coffee pot or something similar is most likely to be the most economical. If you think basically that you have a powder from which you are trying to remove the outer casings. Powder is difficult to work with, plus you are working with small quantities (unless you are lucky enough to have loads of resin powder), so a container in which you can sit it all to steep before pouring through a filter will be best. In a tube you will have lots of excess space and the gas/liquid butane will blast straight through, blowing around all the powder in the process. The main component however is the filter used after the resin has been exposed to the butane. This is where you'll extract the casings in which the resin resides. The oil will be dissolved in the butane and any remaining solids will be the resin heads themselves which you want to filter off using paper coffee filters.
\nLike I say though, if you have the resin powder extracted already then I see that as the end of the road and you want to then concentrate on the cannabis you removed that resin from for oiling rather than the resin itself. 
\nA Note About ISO Oil: After I filter out the plant material, I like to let it sit un-evaporated in the dish before heating for a few days. This way most of the solvent will have evaporated off already. This has two advantages. Evaporation will be very quick and so you can do the evaporation indoors and it won't smell up the place for days or blow up your house. It only needs to be heated with a small amount of iso after it has been extracted. Heating it with a lot may make a less clean oil.

 

why not make green dragon with the kief. just mix the appropriate amount and let it sit for some time and then a few drops will do ya