Please Help. Trying To Figure Out Best Qwiso Method.

Discussion in 'Harvesting and Processing Marijuana' started by Mr-NiceGuy, Jul 13, 2014.

  1. Hey everybody, I've been experimenting making a couple batches of qwiso with trim. I used just around 1/4 of trim with 99% Iso.
     
    My method:
    1. Freeze the Iso, the trim, and the jar I'll be doing the wash in for atleast 24 hours.
    2. Take out of freezer and quickly get to ventilated area.
    3. Quickly put the trim in the jar and pour enough alcohol just to cover the trim.
    4. Swirl (NOT vigorously shake.) for 15 seconds.
    5. Strain onto a ceramic plate.
    6. Let sit for 24-48 hours, I find 48 is better.
    7. Scrape up and enjoy.
    (Opt.) 8. Place powdery qwiso into silicone container and place on coffee mug warmer for 30s-1m and look for bubbles. Usually melts it into a shatter consistency.
     
    I am really fond of my method because I've gotten some golden strings and powder, however, I know that leaving it out in the open for 48 hours results in a dramatic loss of terpenes. What would be the best method to keep as many terpenes as possible? I also know that using Iso knocks quite a few terpenes away as they evaporate rapidly with it. Any help will be appreciated. -Mr.NiceGuy

     

Share This Page