Hey everyone, so me and my buddy just switched vapes to try out each other's, he has my firefly and I have his pinnacle pro (with water tool attachment of course). Now having this I went ahead and picked up so wax, I just wanna hear some experiences or some pointers on the best way to use the wax in the pinnacle pro and how it worked for you guys. I can't wait to hear your responses! Sent from my iPhone using Grasscity Forum
What ever you do dont go up to high on the temp trying to do wax. They have the capabilities of destroying them selves with their own heat.
^ True. Send in one of your PonG attachments or the mouthpiece to vaporblunt..cost you like 4 or 5 bucks to ship, and they will send you a glass one for free..here's a pic of mine. It is a good fix for the plastic problem, it's airtight..I'm gonna get a baby bottle nipple and cut the top off to make it more secure. Seen someone suggest that on FC Everyone that has a pnp has to get this glass mouthpiece..it improves the taste so much and you don't have to worry about the plastic
Will the pinnacle still destroy its self with wax and the new glass piece? Any idea on a fix? Sent from my sonic screwdriver
No..I've used this vape way too many times to count on the 4th temperature with flower..never had any problem with anything except the pong. I also follow the pnp thread closely on FC, and some people are having cracks, but it's because the way the pong fits onto the vape. If you remove the pong while the vape is hot, it comes off easily. So the pong attachment is what causes problems..this is why everyone needs to get the glass piece The wax bullet is kinda shitty..the way I vape wax is just sandwich a little in between some herb in the normal bullet..gives really nice clouds
So just a layer of some flower, than a little dab of wax and more flower on top? Sounds fantastic, and level 4 works good for it? Can't wait to try it out Sent from my iPhone using Grasscity Forum
And also, I have the glass adapter on the way, but really wanna test the wax tomorrow, so should I take the adapter out right after use; or take it out after it cools down? Sent from my iPhone using Grasscity Forum
Temp levels 4 and 5 are believed to what is leading to cracked pinnacle bodys. I wouldnt go above 3 unless you want to risk it. I would try to take the adapter out asap and basically do what ever it takes to keep from to much heat building up in the unit.
Remove the pong right after use..letting it cool down and then removing is what can cause the cracking. It's the way the pong fits onto the vaporizer and the constant removing that makes it develop a crack. I can look on one of my pongs and see exactly what is causing the cracking..there's a clip piece on the front-inside part of the pongs..that clip piece will either expand or contract with the pong depending on the temperature. Directly from vaporblunt: If the pong acts like it doesn't want to come off, don't force it off. Heat the unit back up and then take it off. The crack issue is not caused by excessive heat, it's caused by the pongs
So if I wanted to use it with wax at higher temps I wouldn't have to worry about it cracking once there new attachment is out Sent from my sonic screwdriver
False. The body can still crack. It is still made of plastic that degrades with heat and becomes brittle over time.
Not sure where you're getting this from..cracked body? I have never seen a cracked body on a pinnacle pro caused by heat..the only time I saw a cracked body was from someone that dropped it. Again, I've followed the pnp thread very closely on FC, and have never seen a pnp with a cracked body caused by heat..it just doesn't happen. Your information is incorrect. The cracking issue on the top portion of the sleeve is caused by removing the pong over and over at a cold temperature, and eventually, the pong tears a crack in it. This is why the pong is trash, and the glass piece is needed. OP - If you want real information from people who own the vaporizer, as well as the manufacturer, go to the pinnacle pro thread at fuckcombustion.com
The cracked bodys are not simply just because the pong is tearing the unit. There is legit problems of that plastic degrading. You might want to follow the PNP thread more closely. It is a shame that the FC moderators wont let that thread turn in to the shit storm over health that it should be.
I'm not so sure you know what you're talking about. When using the gong piece that I was sent, there is no plastic that gets hot enough to degrade. There's also no plastic in the air-path, it's all glass, so where would any health concerns arise? The water tube provides an even better toke, and best of all, it's portable.
Im not sure you are aware of the complete info in the fc thread Sent from my SAMSUNG-SGH-I747 using Grasscity Forum mobile app
Are you aware of the complete info in the fc thread? You don't even own the vaporizer, yet somehow you read every page in the thread? Right..
Yes I have read the whole thread. I have read a handful of threads all the way on FC of vapes that I have very heavily considered getting. Ive been following the pinnacle thread up to date since it was around page 60 so its not like I had to sit down and read all almost 200 pages in one sitting. It doesnt really matter though