Food and Drug Administration (FDA) Disclosure:

The statements in this forum have not been evaluated by the Food and Drug Administration and are generated by non-professional writers. Any products described are not intended to diagnose, treat, cure, or prevent any disease.

Website Disclosure:

This forum contains general information about diet, health and nutrition. The information is not advice and is not a substitute for advice from a healthcare professional.

Can cone joints be made with rolling machines?

Discussion in 'Marijuana Consumption Q&A' started by mattytsanchez, Apr 18, 2013.

  1. #1 mattytsanchez, Apr 18, 2013
    I know cylindrical ones are usually made with them but is it possible to make cone joints with them?
     

    Attached Files:

  2. #2 ChronicKiller7, Apr 18, 2013
    From my experience and knowledge... No. But Raw makes a pre rolled cone with a filter. Any reason you want a cone over a normal j?
     
  3. #3 Leoo617, Apr 18, 2013
    I've done it mostly by mistake.
     
  4. #4 mattytsanchez, Apr 18, 2013
    Mainly because with cones the filter cant fall out the back end. When I smoke regular js it sometimes falls out on accident.
     
  5. #5 mattytsanchez, Apr 18, 2013
    Do they come out looking/smoking pretty good though?
     
  6. #6 ChronicKiller7, Apr 18, 2013

    Just push it back in hahaha and tap it on the table and make it even and slightly twist the tip to keep it packed well. I'll post a pic Saturday or something as I'm sure Ill have a j at somepoint hahaha. I use Element filter tips and Element papers. They're great.
     
  7. #7 BudBrownies, Apr 18, 2013
    Can cone joints be made with rolling machines?

    false.
     
  8. #8 BudBrownies, Apr 18, 2013
    Think about it. To straight rollers. The same size and length. It will go straight. If one of the rollers where bigger than the other. true.
     
  9. #9 lianghai, Apr 18, 2013
    Spliffs are my preference when smoking in a group.
    [​IMG]
     
  10. #10 ChucklesT, Apr 18, 2013
    ^this. I hate when this happens, which is why I had to learn how to cone. It's not hard, especially if you make your roach tapered. Then the paper will naturally roll into a cone.
     
  11. #11 BudBrownies, Apr 18, 2013
    Filling empty cones is best to pack as much green making it burn slower and truer. You will need a tiny poker to pack the green done as you fill. It take time but its worth it. You can scoop the herb in the cone to fill it faster. I make my own. I take half the paper off and make a filter. Fold that thing into a cone.
     
  12. #12 mattytsanchez, Apr 18, 2013
    Yeah i know its simple as that, i just would prefer it never fall out haha
     
  13. #13 BudBrownies, Apr 18, 2013

    I don't understand why it would "fall out" but each their own.
     
  14. #14 mattytsanchez, Apr 18, 2013
    I wonder though, since you have to hinge both sides up to actually start rolling it, if you only hinge up one side if it will come out as a cone. Just wondering.
     
  15. #15 AjBurge, Apr 18, 2013
    I roll cone joints with raws all the time, With filters in the end, and somtimes i dont get the filter wide enough but to fix that problem i get cheap ass papers and use the sticky or gum ( just rip that part off) lick it and wrap it to the filter sticking out at the end and the paper to seal it from not falling out and sealing it. but to answer OP's question no, they don't make cone rollers, but as someone has previously said you can buy pre-rolled cones from raw.
     
  16. #16 ski high n fly, Apr 18, 2013
    dog you gotta stop double posting. ive seen you do it so many times today
     
  17. #17 mattytsanchez, Apr 18, 2013
    Sometimes i guess the moisture from your lips sticks to the filter and pulls out as you pull the joint away from your mouth, & probably other ways.
     
  18. #18 Randomdead, Apr 18, 2013
    I've learned to just roll them into cones?:confused_2:

    its easy enough by hand. This reminds me. I've got quite a few how-2s to write.
     

Share This Page