Jump to content

According to Grasscity Growers, what are the best grow tents out there?

GC Growers unite! Please give me feedback in this thread here

Thx

SJ

srcog screen

  • by dampothead
  • Dec 19 2012 10:45 AM
  • 8 Replies
  • Please log in to reply
  • Registered User

  • PipPipPip
  • dampothead
  • Registered Upgraded
  • 50 posts

Posted 19 December 2012 - 10:45 AM

So I'm building a screen but I can't seem to find the a screen ... Like I built the base ... were u put the screen on but I can find something big enough in my price rang .... I bought some chicken wire but the holes were to small, about an inch ... I was thinking of buying string or just cutting the chicken wire to make the holes bigger but if anyone has any better easier ideas plz share
Replies (8)

  • here piggy piggy

  • MIDLIFE
  • Registered Upgraded
  • 2,252 posts

Posted 19 December 2012 - 12:40 PM

farm fencing 2x2 square holes made from galvenized wire is the best imo.

string will work, if you can keep it nice and tight,
have you made the screen frame with adjustable hight legs ?
keep the screen low to start with as it's easy to move them up but not so easy to move them down.

middy

  • sorry n shit

  • TinTizzy
  • Registered Upgraded
  • 13,432 posts

Posted 19 December 2012 - 03:18 PM

I made mine with pvc pipe and threaded weed whacker line through it 2" apart

  • High hopes

  • Greentrails
  • Registered Upgraded
  • 3,512 posts

Posted 19 December 2012 - 09:10 PM

go to the local hardware shop, figure out how many feet you would need to make a square, buy that.

buy balers twine to, or some sort of heavy-ish string.

also buy 4 elbow joints, that fit the inner diameter of your pvc piping.

at home:

-drill along the pipe every 2" on all pieces of pipe.
-connect into square using elbows. (its ok if its slightly floppy at this point)
-weave the twine/string through. use an "over under" pattern when doing the second half of the weaving.(pull the string good and tight before you tie it off, if done right it will pull your screen into a rigid position.

voila

  • Guest_Doc-J_*
  • Unregistered / Not Logged In

Posted 19 December 2012 - 09:23 PM

Do you guys using PVC hang your screen, or build them with legs?

  • High hopes

  • Greentrails
  • Registered Upgraded
  • 3,512 posts

Posted 19 December 2012 - 09:49 PM

Do you guys using PVC hang your screen, or build them with legs?


the way i built mine was for a 2x2 tent...I made my pieces 2x2 but did a dry run with out the screen weaved. this way i could cut it out how i wanted so that put in place it would have the armpit of the corners on the outside of the tent poles.

  • Registered User

  • PipPipPip
  • dampothead
  • Registered Upgraded
  • 50 posts

Posted 19 December 2012 - 10:56 PM

So my frame is made out of wood I've been waiting to put the legs on it but I was thinking it should be about 2 and a half feet .... My tallest plant is about 3 feet but all the other are about a foot .... How tall should I make the screen .?.?.?...... and I was thinking of using a galvanized wire fence if I can find one .... The ones in home depot are like 60 for like 70 feet which are the cheapest ......

  • High hopes

  • Greentrails
  • Registered Upgraded
  • 3,512 posts

Posted 19 December 2012 - 11:37 PM

So my frame is made out of wood I've been waiting to put the legs on it but I was thinking it should be about 2 and a half feet .... My tallest plant is about 3 feet but all the other are about a foot .... How tall should I make the screen .?.?.?...... and I was thinking of using a galvanized wire fence if I can find one .... The ones in home depot are like 60 for like 70 feet which are the cheapest ......


Depends, is the 3 foot tall lanky an bendy? Could you mash the screen down that far? It depends on how much height you have in your grow space. You can also just raise the other plants.

  • Registered User

  • PipPipPip
  • dampothead
  • Registered Upgraded
  • 50 posts

Posted 20 December 2012 - 12:25 AM

My tent is about six feet tall and ya I can bend it with my hand to about 2and a half feet .....


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users