Diagnose your deficiencies here - EASY Learning table

Just a good deficiency table i found

 

Welcome ^_^

 

Easy Guide On Spotting and Fixing your plant Deficiencies ^_^


Boron Deficiency

Problem: Cannabis leaves and roots show abnormal and slowed growth when showing a boron defiency. The first signs of a cannabis boron deficiency is abnormal or thick growth tips. New leaves may display chlorosis (yellowing of leaves). Stems may become rough or hollow. The plant may look like it has a calcium deficiency because boron is needed for the plant to properly use calcium. New growth is affected the most, and may look like it's been burnt or scorched.

This marijuana plant is showing signs of a boron deficiency in it's new growth

This flowering cannabis plant is showing dark patches which appear to be the first signs of a boron deficiency


Solution: Boron is not absorbed will without enough potassium and nitrogen, or if there isn't enough moisture. You plant may also exhibit signs of a boron deficiency if the pH is too high or low. Flush your system with clean, pH'd water that contains about half the nutrients needed for the plant and watch to make sure that the problem clears up for new growth.


Calcium Deficiency

Problem: Signs of a cannabis calcium deficiency can be hard to pin down since calcium deficiencies are often accompanied by magnesium, iron, and other deficiencies. However, some of the major signs of a calcium deficiency are in the leaves which will display dead spots, crinkling, spotting, or small brown spots. Another sign of a cannabis calcium deficiency is new leaves will appear small and distorted with curled tips The insides of the plant and well as the flowers/buds may show signs of decay. Roots may show signs of bacteria and may be dying off or be under developed.

This marijuana leaf is showing signs of a calcium deficiency

This cannabis leaf is showing signs of a calcium deficiency

This pot leaf may be showing signs of a calcium deficiency


Solution: If the pH of your root zone is off, then your cannabis cannot properly absorb calcium through its roots so the first step is to ensure that you have the correct pH for your growth medium. Learn more about pH and cannabis. Different strains of cannabis tend to have different nutrient problems, but calcium, magnesium, and iron deficiencies often appear together in cannabis. Therefore many growers decide to purchase some sort of Calcium-Magnesium (often called Cal-Mag) supplement for their grow room in case this common deficiency appears. I have listed some available Cal-Mag supplements that I have used along below with some general information about each one. After supplementing with Cal-Mag and correcting the pH, you should expect to see new healthy growth within a week.

Botanicare Cal-Mag Plus is a great supplement for cannabis that has a calcium, iron, or magnesium deficiency

Copper Deficiency

Problem: A cannabis copper deficiency manifests itself as leaves curling back, lack of growth, and unusual coloring of the leaves. New young leaves may be dark and twisted, while other leaves may start showing signs of yellow or white. It is very unlikely that there is no copper available in your water or soil. Copper deficiencies generally crop up when there is a pH problem, so that the cannabis can't get to the copper even though it's there.

This marijuana plant is showing signs of a copper deficiency
A close up of a cannabis plant that is showing signs of a copper deficiency with dark, twisted leaves

This cannabis plant appears to be deficient in copper


Solution: Flush your system with clean, pH'd water that contains about half the correct amount of nutrients needed by the plant. Watch to make sure that the problem starts to clear up within a couple of days.

Heat and Light Stress

Problem: Your cannabis plant can only withstand a certain amount of heat and light. After a certain point, your cannabis will start exhibiting signs of stress on the leaves near the sources of light and/or heat. Your leaves will get yellow or brown brown spotting and may appear generally burnt in places. The first two pictures are of heat stress, and the last picture shows a marijuana plant which is showing signs of light burn (too much light).

This marijuana leaf shows signs of heat stress

This marijuana leaf shows signs of heat stress

This marijuana plant shows signs of light burn


Solution: Find a way to lower the temperature and/or increase the circulation in the grow room or grow area if heat is the problem. If your marijuana plants are just getting too much light, try removing some of the lights or moving your lights further away from the tops of the plants. When learning how to weed, it's best to try to keep things at a comfortable room temperature at all times for optimal growth.


Iron Deficiency

Problem: An iron deficiency manifests itself as yellowing of the leaves although the veins will tend to stay green. It looks similar to a magnesium deficiency, but will only affect younger leaves.

This young marijuana plant appears to have an iron deficiency

The cannabis leaves are showing the first signs of an iron deficiency

This info-graphic has more information about iron and your marijuana plant


Solution: Iron deficiencies are very uncommon as long as the pH is kept below 6.5 (5.7 for hydroponic or rockwool). Too much Phosphorus can also lock up iron. The best thing you can do is check the pH of your system, and then flush the system with clean pH'd water that contains nutrients at half strength to start, then start working your way up to full nutrient strength. It's worthwhile to note that iron has a tendency to react with many other components of fertilizer solutions and can cause other nutrients to be locked up from the plant. When supplementing your plant with iron, it is often necessary to not use fertilizer for that watering. If you are supplementing with iron, make sure you first read the label of both the fertilizer and the iron supplement you are using to minimize any problems.


Magnesium Deficiency

Problem: The edges of the leaves may become yellow or bright green and may start feeling crispy to the touch. The light green or yellow coloring may also effect the veins of the leaves.

This marijuana leaf is showing signs of a magnesium deficiency

This cannabis leaf is showing signs of a magnesium deficiency

More information about magnesium and growing marijuana


Solution: It is very important to maintain a proper pH in order to avoid a magnesium deficiency. Adding more magnesium to a system when there is a pH lock-out will only make the situation worse because the plant will not be able to absorb any magnesium until the pH has been corrected. Flush the system with properly pH'ed water that contains a full set of proper nutrients and see if the new growth starts looking healthier.


Manganese Deficiency

Problem: Leaves may become yellow in between the veins, with mottled brown spots on the affected leaves. These brown dead patches may spread and eventually kill the leaf. Leaves may also shred and fall apart.

Overall growth of the marijuana plant may be stunted.

Manganese marijuana deficiency looks like this

This marijuana plant is showing the signs of a manganese deficiency

More information about manganese and your marijuana plant


Solution: Manganese deficiencies are often caused by a pH that is too high, or if the plant is getting too much iron.

If you have a manganese deficiency in soil, try to correct pH to 6.0 - 6.5l. In hydro, correct pH to 5.5 - 6.0. You are looking to avoid higher pH ranges, as this is where manganese deficiencies are most likely to occur.

Flush your system with clean, pH'd water that contains about half the correct amount of nutrients needed by the plant. Watch to make sure that the problem starts to clear up within a couple of days.

Molybdenum Deficiency

Problem: The initial symptoms may appear similar to a nitrogen deficiency (yellowing of older, lower leaves). Leaves may become mottled or spotted. However, the tell-tale sign of a molybdenum deficiency is the leaves may start to display a unique orange, red or pink color around the edges which will start to move toward the center of the leaf. Sometimes the color appears in the middle of the leaves as opposed to the edges.

This marijuana plant is showing signs of a molybdenum deficiency

This cannabis plant is showing signs of a molybdenum deficiency

This Cole Train Cannabis plant is showing the first signs of a molybdenum deficiency (distinctive red around edges of leaves)

Solution: Flush your system with clean, pH'd water that contains about half the correct amount of nutrients needed by the plant. Watch to make sure that the problem starts to clear up within a couple of days. Molybdenum gets locked out at lower pH ranges. Molybdenum may get locked out in soil that has a pH of lower than 6.5. With hydro or soil-less mediums, molybdenum may be locked out at pH ranges of 5.5-6.0 and lower. Try to keep the pH of your growing medium above these ranges to help prevent a molybdenum deficiency.


Nitrogen Deficiency

Problem: Nitrogen is important during the vegetative stage of your cannabis plants. As your plants start flowering, they will need lower amounts of nitrogen. A nitrogen deficiency will cause the older, lower leaves on your plant to start turning yellow and eventually die. It's relatively normal for your plant's leaves to start turning yellow towards the end of your flowering cycle as the plant becomes nitrogen deficient while it's creating its buds. However, if you notice your leaves turning yellow in the vegetative stage or in the beginning parts of the flowering stage, your plant may be experiencing a nitrogen deficiency which will need to be treated. The first picture is a plant in the vegetative stage which is experiencing the beginnings of a nitrogen deficiency. The second plant is showing signs of nitrogen deficiency late in flowering and is completely normal. The last picture is an infographic about nitrogen and your marijuana plant.

This cannabis plant has a nitrogren deficiency shown by the yellowing of the lower, older leaves

The signs of nitrogen deficiency (yellowing of leaves) in older, lower leaves is normal towards the end of the flowering cycle

Information about nitrogen and your cannabis plant


Solution: You can find many pre-mixed nutrients from the store which contain nitrogen or you could use nitrate of soda or organic fertilizer which are both good sources of nitrogen. Try supplementing your regular nutrients with a bit more nitrogen and see if the plant starts recovering.



Nitrogen Toxicity

Problem: Dark green leaves, weak stems, and overall slow growth. Leaves may eventually turn brown and fall off.

This marijuana plants has been fed too much nitrogen

Infographic about nitrogen and your marijuana plant


Solution: Reduce the amount of nitrogen that is being fed to the plants.


Nutrient Burn

Problem: You may notice the tips of your plants showing signs of nutrient burn. If it only seems to be affecting the tips, then there's no need to worry, but if you start noticing the problem spread to the whole leaf, then you should immediately do something to treat your plant before there's more damage. Nutrient burn can also manifest itself as random spots around the edges of the leaves, or with leaf tips curling downwards.

The first signs of nutrient burn on a marijuana seedling

This marijuana plant has the first signs of nutrient burn

This marijuana plant has been fed way too many nutrients


Solution: Flush your system with plain, pH'ed water. Give your plants some time to recover, and start them with a fraction of the nutrients you were giving them before working your way up to more nutrients. Many nutrients come with instructions to feed your plant more nutrients than most plants actually need. It's good business for them if you use more nutrients. However, in my experience it's a good idea to view the feeding charts that come with nutrients as the maximum amount of nutrients and actually start with much less.


Over watering

Problem: Your plants leaves will start drooping if they've been over-watered or under-watered. If you've overwatered your plant, its leaves will be firm and curled down all the way to the stem of the leaf. You may also notice Chlorosis (Leaf Yellowing). Plants use their roots to get oxygen which is dissolved in water or oxygen in their grow medium. When you overwater a plant, its roots are sitting in stagnant water which no longer has any oxygen left. The reason your plants droop is because basically their roots are starving for oxygen.

An overwatered Marjuana plant

Marijuana Plant drooping due to being overwatered


Solution: The best thing you can do for overwatered plants is give them time without watering, and then start them off slowly until things seem back to normal. You can try to increase the temperature and airflow to help the water evaporate more quickly. You can also use a pencil to gently poke some air holes into the growing medium to provide extra aeration and oxygen to the roots.

For soil grows, you generally only want to water the plant when the soil feels dry if you press a finger in it. You can also use the "lift the pot" method described below (under Underwatering) to decide when to water your plants. For other growing mediums besides soil, your watering method will vary, but if your plants are drooping and you've been feeding them a lot of water, it's a good idea to cut back and see if that helps.


Phosphorus Deficiency

Problem: Phosphorus aids in root growth and overall health of the plant and is especially essential when the plant is in flowering. Cannabis loves phosphorus and it is very unlikely that cannabis gets too much phosphorus. A plant which is deficient in phosphorus will have slow, stunted growth. If there is a major deficiency, the leaves may exhibit dark gray or purplish splotches. The last picture below is an info-graphic with more information about phosphorus and your marijuana plant.

This marijuana plant leaves are showing signs of a phosphorus deficiency

This cannabis leaf is showing the final fatal signs of a phosphorus deficiency

This infographic has more information about phophorus and your marijuana plant




Solution: Check the pH and flush system. An excess of Fe and Zn may cause a phosphorus deficiency. If you've tried everything else, then you may try adding a bit more phosphorus to your feeding schedule and see if that helps clear up the problem. Cannabis plants love phosphorus, and therefore it is unlikely that you will give your cannabis too much phosphorus.


Potassium Deficiency

Problem: Older leaves turn yellow then start getting dark, scorched lesions around the edges of the leaves. Plants may stretch and stems may become weak. The symptoms are very similar to an iron deficiency except the tips of the leaves curl as the edges burn and die. The last picture below has some more information about the potassium requirements of your marijuana plant.

This weed plant shows signs of a potassium deficiency

This pot leaf shows signs of a potassium deficiency

This marijuana leaf shows signs of a potassium deficiency

This cannabis plant is showing signs of a potassium deficiency

This info-graphic has information about potassium requirements when growing marijuana

Solution: Potassium isn't absorbed properly when there is too much calcium or nitrogen in the system. Check the pH of your water, and flush your whole system with water that contains half the normal amount of nutrients and see if your plant starts showing signs of improvement.



Root Rot
Root Rot

Problem: Roots need water, but if they are exposed to water with bacteria they will start to rot. Roots that have been drowning in too much water without enough available oxygen are much more susceptable to problems. Healthy roots are white to cream-colored while roots affected by root rot are brownish and actually smell like they're rotting. Plants affected by root rot will spontaneously start losing their leaves, yellowing, drooping, and otherwise look like they're dying. You will also notice that affected plants will start drinking less water. If you notice these symptoms in your plant, then it can't hurt to try all the suggestions for stopping root rot.

It's important to notes that root damage is permanent. A recovering plant will be able to make new growth, but it's old infected roots will likely never recover. Root rot mostly affects hydroponic systems, but can also result from over watering your plants in soil or other medium. Basically anytime the roots are sitting in water, they are at risk of devloping root rot.

Root Rot showing itself as brown slimy roots on this marijuana plant

Signs of root rot in this hydroponic marijuana plant's roots


Solution: It can be tough to get rid of root rot and many people feel it's easier to just scrap the plant and start over. However, there are proven techniques that will cure your plant of root rot problems. In order to get rid of root rot successfully, you need to take a two pronged approach. You will need to treat the plant's root directly and you will also need change the plant's environment so that root rot no longer has a good place to grow. If you don't fix the environmental causes of root rot, then it will just keep coming back no matter what you do. Therefore, it's important to go through the below list and make sure you're covering all your bases to prevent a re-occurrence. It's also important to note that affected roots will likely never recover, just like how discolored leaves on the plant will never recover. What you're looking for is new, healthy white root growth.



Sulfur Deficiency

Problem: A sulfur deficiency will manifest itself as all-over chlorosis (yellowing of leaves) starting with the oldest leaves and may look like a nitrogen deficiency at first. The parts that are underneath the leaves may take on a distinctive pinkish red or orange color. The buds on a flowering plant may start dying off. Unlike other deficiencies that cause chlorosis, a sulfur deficiency will start at the back of the leaf and move it's way forward as opposed to started at the tips. Leaves become stiff and brittle and will eventually fall off.

This marijuana plant is showing the signs of a sulfur deficiency

This cannabis plant is showing th very first signs of a sulphur deficiency

This pot plant is showing the signs of a sulphur deficiency (yellowng of leaves starting from the center)
More information on sulphur deficiencies in your cannabis plant


Solution: Check and correct your pH to make sure that your sulfur isn't being locked out. Sulfur moves slowly through the plant so it may take a few days after you fix the problem before you start noticing an improvement in your plant.




Under-watering

Problem: If your plant is drooping and you're sure you haven't overwatered it, than it might need more water. If you've been underwatering your plant, its leaves will look limp and lifeless.

An underwatered marijuana plant




Solution: While it can be good to let your plant dry out a bit after watering, you should always water the plant again before it's leaves start drooping. A good way to tell if a potted plant is ready to be watered is to pick it up and tell if it feels heavy or not. As plants use up all the water in their pot, it will start to get lighter. If you need something for comparison, you can get an extra pot and fill it with your growing medium. Now you can use this extra container for comparison with your potted plants as it represents the 'dry weight' of your growing medium. If you pick up a potted plant and its feels just slightly heavier than your dry pot, then you know it's time to water your plant. After a while you get a feel for how heavy your plants need to be and you may not even need the extra pot anymore.




Zinc Deficiency

Problem: Younger leaves start yellowing in between the veins. Leaf tips get discolored and start dying. the leaves will take a unique banded appearance and the plant will stop growing vertically. There will be much less space between new nodes which will cause all the new leaves to start bunching together. If the plant is budding, it's flowers may start dying.

This cannabis plant is showing sings of a zinc deficiency

This marijuana plant is showing signs of a zinc deficiency in it's new growth

This info-graphic contains more information about the importance of zinc and your marijuana grow


Solution: Flush your system with clean, pH'd water that contains about half the nutrients needed for the plant (including zinc, iron, and manganese). Watch to make sure that the problem starts to clear up on new growth within a couple of days.

 

Hope i could be of some help =)

 

yes indeed but remember when mixing to use a few drops of dish soap to make it soluble in the water or else your gonna get a clogged sprayer ^_^

 

Id say it looks like Phosphorus Deficiency but i guess there is the possibility its cal.. hmm just use some high phosphorus bat guano make a low dose simple tea? and try a little bit of cal/mag see if that helps plants can always use a good helping of cal/mag

 

 
 
you need to use high quality humus for tea not some bag of crap soil that set on a shelf for years