Ez Cloner PROBLEMS

tenacity2986 · #1 (**permalink**) 08-13-2009, 03:45 AM

I am on my third BATCH of clones in which the first 2 batches have failed.... And it seems like the changes i have made in this 3rd batch are beginning to yield the same results as the first two batches...FAILURE!!!

So my problem is that i am getting soggy stems on the stem exposed to the misting for root formation...

its a mushy stem and eventually the plant on top of the neoprene insert connected to the same stem gets weak and falls over.... aka they die.

Any clues?

I am cutting the stem under water at an angle 45 degrees, using clonex gel, and have the ph dialed in at about 6.0.... ANY ADVICE PLEASE!!!! I ALREADY PUT THE MOTHERS INTO FLOWERING SO I NEED TO GET THIS LAST AND FINAL BATCH OF CLONES TO ROOT!!

plausible · #2 (**permalink**) 08-13-2009, 04:20 AM

I had the same problems. try using just tap water for cloning. make the space between the lid and the surface of the water to about 4". set the mister on an inverted glass or something similar, to get the proper depth to create the mist. the smaller space worked really well. the next batch of clones was 100% sucessful. worked for me, hope it helps you.

tenacity2986 · #3 (**permalink**) 08-13-2009, 04:28 AM

wiat so is the water level suppose to be above the red little mister spray nozzles? I have the water level below the nozzles and if i put my finger in one of the holes where they get "misted" from... It doesnt get misted, more like rained on!! lol so am i suppose to literally be getting like a foggy mist?

plausible · #4 (**permalink**) 08-13-2009, 04:35 AM

my bad. thought you were using an ultrasonic mister........nevermind.

tenacity2986 · #5 (**permalink**) 08-13-2009, 04:48 AM

ok i juss answered my own question.... So why are the misteres spraying droplets when they are called misters? i would call them more like sprinklers lol ..... ANYWAYS... why soggy stems? no idea here but i kno this is pretty effed up to spend that kindd of money on an EZ clone and have it do jack for yah. pretty pissed, this deserves a bong rip

tenacity2986 · #6 (**permalink**) 08-13-2009, 06:31 AM

okay this aint the same GC i was a part of 3 years ago.
community has gotten weaker as far as people who stay here vs. random foes who just ask a question than are never heard from again.

so maybe i can do the same and expect simlilar results.

WHY DO I GET SOGGY STEMS WHEN CLONING IWTH THE EZ CLONE!
im bout to light up every forum and every thread... damn this is pissin me off beyond ur wildest gay dreams

buddy5150 · #7 (**permalink**) 08-13-2009, 06:04 PM

whats your water temp?
how long till they get soggy?
Is it only 1 strain your trying?
any gray slime on cuts?
did you disinfect btwn cycle?

I use a little h202 35% when temps get over 70. to me i sounds like high temps as i have had a similar issue with temps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Marijuana does cause problems	Interimo	General	34	11-13-2009 08:52 AM
Trying to get back to smoking, but having problems. PLEASE RESPOND	Nick83	General	4	05-02-2009 06:21 AM
General Problems	flaw	Sick Plants and Problems	1	01-26-2009 09:48 PM
Nutrients/Bugs/Various Problems Guide	Stylez1877	Sick Plants and Problems	11	12-24-2004 12:29 AM

Site links

FAQ

Important

Extra

#1 (permalink) 08-13-2009, 03:45 AM
tenacity2986 Registered User Join Date: Sep 2006 Posts: 752	Ez Cloner PROBLEMS I am on my third BATCH of clones in which the first 2 batches have failed.... And it seems like the changes i have made in this 3rd batch are beginning to yield the same results as the first two batches...FAILURE!!! So my problem is that i am getting soggy stems on the stem exposed to the misting for root formation... its a mushy stem and eventually the plant on top of the neoprene insert connected to the same stem gets weak and falls over.... aka they die. Any clues? I am cutting the stem under water at an angle 45 degrees, using clonex gel, and have the ph dialed in at about 6.0.... ANY ADVICE PLEASE!!!! I ALREADY PUT THE MOTHERS INTO FLOWERING SO I NEED TO GET THIS LAST AND FINAL BATCH OF CLONES TO ROOT!! __________________ http://forum.grasscity.com/advanced-...ite-shark.html

#2 (permalink) 08-13-2009, 04:20 AM
plausible Registered User Join Date: Aug 2009 Posts: 3	Re: Ez Cloner PROBLEMS I had the same problems. try using just tap water for cloning. make the space between the lid and the surface of the water to about 4". set the mister on an inverted glass or something similar, to get the proper depth to create the mist. the smaller space worked really well. the next batch of clones was 100% sucessful. worked for me, hope it helps you.

#3 (permalink) 08-13-2009, 04:28 AM
tenacity2986 Registered User Join Date: Sep 2006 Posts: 752	Re: Ez Cloner PROBLEMS wiat so is the water level suppose to be above the red little mister spray nozzles? I have the water level below the nozzles and if i put my finger in one of the holes where they get "misted" from... It doesnt get misted, more like rained on!! lol so am i suppose to literally be getting like a foggy mist? __________________ http://forum.grasscity.com/advanced-...ite-shark.html

#4 (permalink) 08-13-2009, 04:35 AM
plausible Registered User Join Date: Aug 2009 Posts: 3	Re: Ez Cloner PROBLEMS my bad. thought you were using an ultrasonic mister........nevermind.

#5 (permalink) 08-13-2009, 04:48 AM
tenacity2986 Registered User Join Date: Sep 2006 Posts: 752	Re: Ez Cloner PROBLEMS ok i juss answered my own question.... So why are the misteres spraying droplets when they are called misters? i would call them more like sprinklers lol ..... ANYWAYS... why soggy stems? no idea here but i kno this is pretty effed up to spend that kindd of money on an EZ clone and have it do jack for yah. pretty pissed, this deserves a bong rip __________________ http://forum.grasscity.com/advanced-...ite-shark.html

#6 (permalink) 08-13-2009, 06:31 AM
tenacity2986 Registered User Join Date: Sep 2006 Posts: 752	Re: Ez Cloner PROBLEMS okay this aint the same GC i was a part of 3 years ago. community has gotten weaker as far as people who stay here vs. random foes who just ask a question than are never heard from again. so maybe i can do the same and expect simlilar results. WHY DO I GET SOGGY STEMS WHEN CLONING IWTH THE EZ CLONE! im bout to light up every forum and every thread... damn this is pissin me off beyond ur wildest gay dreams __________________ http://forum.grasscity.com/advanced-...ite-shark.html

#7 (permalink) 08-13-2009, 06:04 PM
buddy5150 Registered User Join Date: Jul 2008 Posts: 27	Re: Ez Cloner PROBLEMS whats your water temp? how long till they get soggy? Is it only 1 strain your trying? any gray slime on cuts? did you disinfect btwn cycle? I use a little h202 35% when temps get over 70. to me i sounds like high temps as i have had a similar issue with temps. __________________ you shall reap what you sow

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)