smoking and usage

kush<>~ · #1 (**permalink**) 06-09-2008, 07:03 AM

Well the time came for a new bong, as all of them have now been broken. So I wanted to take a different route in my quest for a new piece. So I chose a homemade one. I purchased a vase, new bowl, grommet, and stem. After drilling the hole and setting the stem, I found out that the hole at the top as the mouthpiece, was too big. This made smoking awkward, because I had to place my chin and whole mouth in the piece for any vacuum to happen. So I purchased a stopper, 1/4" hose and installed them to the vase. Its such a nice smoke.

This is what came out of it:

BEFORE

AFTER

bongrubber · #2 (**permalink**) 06-09-2008, 07:24 AM

nice man, definately one of the better made homemade pieces that iv seen

Blocc_Busta · #3 (**permalink**) 06-09-2008, 07:26 AM

hahaha that thing is dope mayne.

2Faded · #4 (**permalink**) 06-09-2008, 09:26 AM

dannnng, that is sick.

nerdboytoker · #5 (**permalink**) 06-09-2008, 11:00 AM

what did you use to drill the hole?

I've been wanting to make my own bongs for a while now but haven't figured out what to drill it with. I've heard a diamond tipped dremmel works, but I haven't tried it.

xlilnickerzzzx · #6 (**permalink**) 06-09-2008, 02:45 PM

glass drill bit

kush<>~ · #7 (**permalink**) 06-09-2008, 03:15 PM

You dont have to use a dremmel. I went to home depot and got a glass/ceramic drill bit. The end of the drill bit looks like a spade.

somekind · #8 (**permalink**) 06-09-2008, 06:07 PM

You could have done the same thing without drilling the glass. Just get a stopper with two holes, one for a long downstem, and another for your mouthpiece/tube.

kush<>~ · #9 (**permalink**) 06-09-2008, 06:25 PM

^^Yeah. True but:

1. I didnt intend for it to end up like it did, although im stoked it did.

2. I like it better this way. Less crowded and looks better in my opinion.

kush<>~ · #10 (**permalink**) 06-10-2008, 01:20 AM

Yeah for the stopper I didnt have to drill a hole because I bought it pre-drilled. My local homebrew store has drilled stoppers (i used #10) for the glass carboys. Then 3 ft of 1/4" hose was all I needed.

Let me know what you guys think.

chadkilla56 · #11 (**permalink**) 06-11-2008, 01:22 AM

sick peice. +rep.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My First Piece (Pics)	Bossman1086	Recreational Marijuana Use	8	12-23-2007 08:57 PM
Exp. potheads ever buy a piece from GC??	chiefMOJOrisin	Seasoned Tokers	7	11-04-2007 03:14 AM
first macro attempt (dank) + piece collection	chikenrockgod	Recreational Marijuana Use	11	09-17-2007 05:44 AM
my gbong piece	apple juice	Recreational Marijuana Use	14	08-26-2006 09:41 PM
Searching for the Perfect Piece	Decent	Recreational Marijuana Use	16	11-14-2005 06:02 AM

smoking and usage

chill out zone

marijuana growing

marijuana news and discussions

web site feedback

Site links

FAQ

Important

Extra

#1 (permalink) 06-09-2008, 07:03 AM
kush<>~ Active toker Join Date: Dec 2007 Posts: 554	New Replacement Piece! -- Homemade Well the time came for a new bong, as all of them have now been broken. So I wanted to take a different route in my quest for a new piece. So I chose a homemade one. I purchased a vase, new bowl, grommet, and stem. After drilling the hole and setting the stem, I found out that the hole at the top as the mouthpiece, was too big. This made smoking awkward, because I had to place my chin and whole mouth in the piece for any vacuum to happen. So I purchased a stopper, 1/4" hose and installed them to the vase. Its such a nice smoke. This is what came out of it: BEFORE AFTER __________________ Toke on! *Strain Reviews: (in the bowl now) Lemon Kush \| Pineapple Kush \| Grape Ape \| Super Jack \| Trainwreck** * \| Disclaimer: Everything that this user says is fictional and for entertainment purposes only Last edited by kush<>~; 06-09-2008 at 07:42 AM.

#2 (permalink) 06-09-2008, 07:24 AM
bongrubber early mornin pimpin... Join Date: Oct 2005 Location: Wisconsin Posts: 119	nice man, definately one of the better made homemade pieces that iv seen

#3 (permalink) 06-09-2008, 07:26 AM
Blocc_Busta Registered User Join Date: May 2008 Location: i'M FROM THE Y4Y AR34 MAYNE Posts: 252	hahaha that thing is dope mayne. __________________ -24" Pure Glass 9MM Single (worked) slit perc, matching worked bowl, diffused w/ A/C -36"Custom Triple Perc Tube 7mm (35x diffused) Ice catcher, Ash catcher. -18" AMG beaker diffused w/ Ice catcher -14" Lux Mini tube w/ 4 tree perc, diffused w/ a Roor A/C "Three to the face is how the boy smokes, the man wit his own strand enjoy the smoke" RIP Furl

#4 (permalink) 06-09-2008, 09:26 AM
2Faded I smoke trees by the acre Join Date: Jan 2008 Location: SoCali Posts: 359	dannnng, that is sick.

#5 (permalink) 06-09-2008, 11:00 AM
nerdboytoker Hoont Join Date: May 2008 Location: Washington Posts: 142	what did you use to drill the hole? I've been wanting to make my own bongs for a while now but haven't figured out what to drill it with. I've heard a diamond tipped dremmel works, but I haven't tried it. __________________ "Prohibition will work great injury to the cause of temperance. It is a species of intemperance within itself, for it goes beyond the bounds of reason in that it attempts to control a man's appetite by legislation, and makes a crime out of things that are not crimes. A Prohibition law strikes a blow at the very principles upon which our government was founded." -Abraham Lincoln (1809-65) U.S. President.

#6 (permalink) 06-09-2008, 02:45 PM
xlilnickerzzzx Registered User Join Date: May 2008 Posts: 247	glass drill bit

#7 (permalink) 06-09-2008, 03:15 PM
kush<>~ Active toker Join Date: Dec 2007 Posts: 554	You dont have to use a dremmel. I went to home depot and got a glass/ceramic drill bit. The end of the drill bit looks like a spade. __________________ Toke on! *Strain Reviews: (in the bowl now) Lemon Kush \| Pineapple Kush \| Grape Ape \| Super Jack \| Trainwreck** * \| Disclaimer: Everything that this user says is fictional and for entertainment purposes only

#8 (permalink) 06-09-2008, 06:07 PM
somekind sun king Join Date: Feb 2007 Location: el Sol Posts: 1,655	You could have done the same thing without drilling the glass. Just get a stopper with two holes, one for a long downstem, and another for your mouthpiece/tube. __________________

#9 (permalink) 06-09-2008, 06:25 PM
kush<>~ Active toker Join Date: Dec 2007 Posts: 554	^^Yeah. True but: 1. I didnt intend for it to end up like it did, although im stoked it did. 2. I like it better this way. Less crowded and looks better in my opinion. __________________ Toke on! *Strain Reviews: (in the bowl now) Lemon Kush \| Pineapple Kush \| Grape Ape \| Super Jack \| Trainwreck** * \| Disclaimer: Everything that this user says is fictional and for entertainment purposes only

#10 (permalink) 06-10-2008, 01:20 AM
kush<>~ Active toker Join Date: Dec 2007 Posts: 554	Yeah for the stopper I didnt have to drill a hole because I bought it pre-drilled. My local homebrew store has drilled stoppers (i used #10) for the glass carboys. Then 3 ft of 1/4" hose was all I needed. Let me know what you guys think. __________________ Toke on! *Strain Reviews: (in the bowl now) Lemon Kush \| Pineapple Kush \| Grape Ape \| Super Jack \| Trainwreck** * \| Disclaimer: Everything that this user says is fictional and for entertainment purposes only

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

#11 (permalink) 06-11-2008, 01:22 AM
chadkilla56 Viva la nation! Join Date: May 2008 Posts: 43	sick peice. +rep.