Honey Oil

[shiftedreality]

HOW DO YOU MAKE IT? my glass vapor whip from a vaporizer is super resinated. i want to be able to use some of that for smoke later on. what can i do? i know that it is pure cannabis THC oils on the glass.

what i am asking:
what are some easy steps for cleaning a glass piece such as this and extracting it? and how do i go about doing that.

[blazinchick37]

I'd be interested also, have the same whip and its very resinated

[wak]

lol the resin on the side aint pure THC, and you dont wanna smoke it. but if you must just go round it with a paper clip onto a piece of tin foil then put that in the oven for a few minuits.

[DClove66]

I think you're confused.. Honey Oil is synonymous with Butane Hash Oil, a method of extracting THC into a viscous goo.

Resin has THC in it, but it's NOWHERE near pure THC. Depending on the kind of bud, I'd guess around 10%, but it also smells and tastes awful.

If you want to get the resin out, heat it up, scrape it with a knife. If you want to make it into BHO, add it to the bud tube in a BHO run.

Here's a good tutorial. Vector is a good brand of butane to use.

[EuDxKing]

I'm scared of messing with butane and stuff like that.

[dwfblitz]

ya you don't want to smoke that unless you're desperate. bad on the lungs plus, as said, you don't get your money's worth with the THC since that leaves the solids behind at the first hint of heat.

i suppose you could collect that resin and maybe rehabilitate it by adding some hash or oil, but you should just scrape that shit out in the trash to be honest.

[godsthirdnut]

Originally Posted by DClove66

I think you're confused.. Honey Oil is synonymous with Butane Hash Oil, a method of extracting THC into a viscous goo.

Resin has THC in it, but it's NOWHERE near pure THC. Depending on the kind of bud, I'd guess around 10%, but it also smells and tastes awful.

If you want to get the resin out, heat it up, scrape it with a knife. If you want to make it into BHO, add it to the bud tube in a BHO run.

Here's a good tutorial. Vector is a good brand of butane to use.

unfortunately you can't chemically extract THC from resin, because the tar is also non polar.

but if you want to try it with bud and are afraid of using BHO, iso works well also but take a little longer. hit up the search button for help.

[MOOT]

Put a coffee filter at the small end of the whip to use as a catch all. Then run hot water through the big end to get all the resin loose. Scrap it down in to the coffee filter and let it dry.

This is the only type of resin I will smoke and it gets you HIGH!

[bss]

I just stuck my vape whip in a plastic bag with some 90% ISO alcohol for a little while and shook it around a bit. Then i just poured that out on a plate and let it evaporate over night and just scraped it up the next day.

[shiftedreality]

Originally Posted by bss

I just stuck my vape whip in a plastic bag with some 90% ISO alcohol for a little while and shook it around a bit. Then i just poured that out on a plate and let it evaporate over night and just scraped it up the next day.

word. thanks, i'll try it!

Originally Posted by dwfblitz

ya you don't want to smoke that unless you're desperate. bad on the lungs plus, as said, you don't get your money's worth with the THC since that leaves the solids behind at the first hint of heat.

i suppose you could collect that resin and maybe rehabilitate it by adding some hash or oil, but you should just scrape that shit out in the trash to be honest.

you are right. how come this this form of resin is that BAD? it looks like perfectly legit oil, a little sticky and just yellow/honeyish like color.

[dwfblitz]

[quote=shiftedreality;2505613you are right. how come this this form of resin is that BAD? it looks like perfectly legit oil, a little sticky and just yellow/honeyish like color.[/QUOTE]

it's tar. there's some THC in it, but it's fucking dirty. I don't think performing some kind of chemical extraction on the tar with acetone or anything is worth the trouble.

[bss]

Vape resin is completely different from pipe resin though. Its not all that black gunk that accumulates in your bowls. All that is going on in a vape is the thc gets so hot that it boils and vaporizes and then gets sucked up through the whip and some of it condenses on the sides and forms a nice golden layer of resin.

[countzer0]

The Vape resin is pure re-condesned thc vapor, It happend when your vapor lingers in the whip and cools back into liquid.

DO NOT LISTEN to others in this thread as there is not tar in this, it is not resin.

Use either alcohol extraction or clean it in your cannabutter pot when making butter.

[shiftedreality]

Originally Posted by dwfblitz

it's tar. there's some THC in it, but it's fucking dirty. I don't think performing some kind of chemical extraction on the tar with acetone or anything is worth the trouble.

dude. its not dirty at all! there is NO black whatsoever. vaporizers do not BURN the product you use. it heats it, and removes all the vapor content.

Originally Posted by countzer0

The Vape resin is pure re-condesned thc vapor, It happend when your vapor lingers in the whip and cools back into liquid.

DO NOT LISTEN to others in this thread as there is not tar in this, it is not resin.

Use either alcohol extraction or clean it in your cannabutter pot when making butter.

haha. thank you +rep.
that is exactly what i imagined it was, but did not know how to explain it. thanks man!

[dwfblitz]

Originally Posted by shiftedreality

dude. its not dirty at all! there is NO black whatsoever. vaporizers do not BURN the product you use. it heats it, and removes all the vapor content.

haha. thank you +rep.
that is exactly what i imagined it was, but did not know how to explain it. thanks man!

oh... i just noticed that you're using a vaporizer. that changes things a bit, I've downgraded my warning against smoking resin from Strong to Medium.