smoking and usage

Goatfish · #1 (**permalink**) 05-01-2008, 10:40 PM

i wasn't sure if this is the right spot but anyway here's my question: I dropped my bowl recently and it is now chipped. Luckily, it chipped right next to the carb basically making the carb twice as big. I can still hit it but its annoying because if i dont cover the whole thing i get a shitty hit. I know i can buy a new bowl but this one has been through a lot with me and I want to keep use it. so anyway if someone knows how to fix the pipe i can fix it let me know pleases..I lost the chip by the way

kshock · #2 (**permalink**) 05-01-2008, 10:45 PM

I dont know, the easiest thing would just get something to cover the entire carb instead o just making the whole smaller. Rubber Cement works best for gluing with glass

BTNHtoker13 · #3 (**permalink**) 05-01-2008, 10:58 PM

id just buy a new bowl

dle_240 · #4 (**permalink**) 05-02-2008, 12:44 AM

The only thing I can think of is cover the entire hole, inculding the carb, and then just make a small hole in the tape where the carb is.

CitySmoker420 · #5 (**permalink**) 07-15-2008, 05:26 AM

silicone sealant will work.

collieman11 · #6 (**permalink**) 07-15-2008, 05:51 AM

baking clay. followed by paint?

fvaambush · #7 (**permalink**) 07-15-2008, 05:54 AM

I'd just say clean it out and keep it as a little memory thing if it means that much to you, just dont smoke out of it anymore. Make sure it doesnt have any resin though cuz then thats just paraph sittin around not being used and that isnt to smart

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Screwed up a bowl, what should I do?	BlazinX1	Recreational Marijuana Use	19	04-19-2008 03:09 PM
Loading the Bowl	Pigment	Recreational Marijuana Use	13	03-14-2008 11:05 PM
Vaporstar vaporizing bowl	gazzard	Recreational Marijuana Use	0	05-19-2007 02:06 AM
What do you look for in a bowl?	Blueflame1986	Recreational Marijuana Use	15	09-26-2005 06:19 PM
Broken bowl - FUCK	stbernard808	Recreational Marijuana Use	15	01-17-2005 05:44 AM

smoking and usage

chill out zone

marijuana growing

marijuana news and discussions

web site feedback

Site links

FAQ

Important

Extra

#1 (permalink) 05-01-2008, 10:40 PM
Goatfish Registered User Join Date: Apr 2008 Posts: 1	Broken Bowl HELP!! i wasn't sure if this is the right spot but anyway here's my question: I dropped my bowl recently and it is now chipped. Luckily, it chipped right next to the carb basically making the carb twice as big. I can still hit it but its annoying because if i dont cover the whole thing i get a shitty hit. I know i can buy a new bowl but this one has been through a lot with me and I want to keep use it. so anyway if someone knows how to fix the pipe i can fix it let me know pleases..I lost the chip by the way

#2 (permalink) 05-01-2008, 10:45 PM
kshock kSTONED Join Date: Feb 2007 Location: rVA Posts: 685	I dont know, the easiest thing would just get something to cover the entire carb instead o just making the whole smaller. Rubber Cement works best for gluing with glass __________________ Old man look at my life, Twenty four and there's so much more Live alone in a paradise That makes me think of two.

#4 (permalink) 05-02-2008, 12:44 AM
dle_240 Dark Gambit Join Date: Sep 2007 Location: GA Posts: 1,384	The only thing I can think of is cover the entire hole, inculding the carb, and then just make a small hole in the tape where the carb is.

#5 (permalink) 07-15-2008, 05:26 AM
CitySmoker420 Registered User Join Date: Jun 2008 Posts: 253	silicone sealant will work. __________________ note: Disclaimer: Any posts derived herin by citysmoker420 should be accepted as pure fiction. Any statements, suggestions, advice, questions or help posted by me should not be taken seriously. I do not condone illegal activities, nor do I participate in illegal acts. All pictures posted by me are found easily on the world wide web. All commentary by me should be accepted as hypothetical discussions and have no basis of fact.

#6 (permalink) 07-15-2008, 05:51 AM
collieman11 South Florida. Join Date: Oct 2007 Location: The Wood Posts: 652	baking clay. followed by paint?

#7 (permalink) 07-15-2008, 05:54 AM
fvaambush Dankbud? Join Date: Oct 2007 Location: NC Posts: 2,562	I'd just say clean it out and keep it as a little memory thing if it means that much to you, just dont smoke out of it anymore. Make sure it doesnt have any resin though cuz then thats just paraph sittin around not being used and that isnt to smart __________________

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)