smoking and usage

badfish · #1 (**permalink**) 08-25-2007, 09:56 PM

The hose to my vaporizer seems to have become loose. It is always falling off of the whip. What can I do to fix this? Do I need a new hose? If so, where should I go to get one, a hardware store? keep smoking

Alphå · #2 (**permalink**) 08-26-2007, 02:54 AM

What kind of vape is it? If its a clear hose, you can buy hose at home depot by the foot, just make sure you measure the ID (inside diameter). ITs usually sold in fractions of an inch.

badfish · #3 (**permalink**) 08-26-2007, 07:32 AM

it is actually an opaque hose, but I dont think it makes a difference. my only concern is that the hose I try to replace it with does not melt from the heat of the vape. I guess I'll try to find the closest match

badfish · #4 (**permalink**) 10-02-2007, 10:23 PM

I thought I'd update this to let anyone else with the same problem know the solution I found. I cut off about half an inch of the part of the hose that was too lose, and now it stays on without any problems.

Blutteufel · #5 (**permalink**) 10-02-2007, 10:29 PM

buddymcbudd · #6 (**permalink**) 10-04-2007, 09:43 PM

Quote:

Originally Posted by Blutteufel

FUCK YES!!! RED GREEN IS THE SHIT!!! i was just thinking they should do a show on bongmaking....with lots of duct tape!

eleven357 · #7 (**permalink**) 10-05-2007, 01:58 AM

Quote:

Originally Posted by badfish

I thought I'd update this to let anyone else with the same problem know the solution I found. I cut off about half an inch of the part of the hose that was too lose, and now it stays on without any problems.

I honestly was about to post that. I am glad you got it fixed!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bongs are actually bad.	blowbud4life	General	388	08-29-2008 06:08 AM
VERY cheap heatgun vaporizer design	Ars moriendi	Seasoned Tokers	9	08-27-2008 07:25 AM
Instructions for making a rather small vaporizer (not lightbulb)	Demonballer	General	9	05-07-2007 08:06 PM
A Review of the Vaporking vaporizer	SteelVibez	Recreational Marijuana Use	4	04-08-2007 05:25 AM
Marijuana Water Pipe and Vaporizer Study	ReformMaryJaneLaws	Recreational Marijuana Use	24	07-18-2006 10:44 PM

smoking and usage

chill out zone

marijuana growing

marijuana news and discussions

web site feedback

Site links

FAQ

Important

Extra

#1 (permalink) 08-25-2007, 09:56 PM
badfish America's Most Blunted Join Date: Aug 2005 Location: NYC Posts: 121	Vaporizer hose falling off The hose to my vaporizer seems to have become loose. It is always falling off of the whip. What can I do to fix this? Do I need a new hose? If so, where should I go to get one, a hardware store? keep smoking __________________

#2 (permalink) 08-26-2007, 02:54 AM
Alphå Soldier Join Date: Feb 2006 Location: USA Occupation: Hired Gun Posts: 2,732	What kind of vape is it? If its a clear hose, you can buy hose at home depot by the foot, just make sure you measure the ID (inside diameter). ITs usually sold in fractions of an inch. __________________

#3 (permalink) 08-26-2007, 07:32 AM
badfish America's Most Blunted Join Date: Aug 2005 Location: NYC Posts: 121	it is actually an opaque hose, but I dont think it makes a difference. my only concern is that the hose I try to replace it with does not melt from the heat of the vape. I guess I'll try to find the closest match __________________

#4 (permalink) 10-02-2007, 10:23 PM
badfish America's Most Blunted Join Date: Aug 2005 Location: NYC Posts: 121	I thought I'd update this to let anyone else with the same problem know the solution I found. I cut off about half an inch of the part of the hose that was too lose, and now it stays on without any problems. __________________

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)