Broke My Zong Bowl!! Pisst Off

roxmysox99 · #1 (**permalink**) 02-03-2006, 12:12 AM

Shit i was emptying ice outta my bong so i flipped it over to get the ice outta the ice catcher and i compltely forgot about the bowl and it fell onto the bathtub and shattered into 3 peices. One piece was half the bowl, the other half of the bowl was another peice and the last peice was the stem of the bowl. Shit now i gotta go 20-30 dollars in to get another one. Because my bowl is full of resin i cant take it to a head shop because they will be pisst the fuck off. So what do i have to measure on the broke bowl so i can get a new one??

FUCK I AM PISST

Maleeh

GrowKat · #2 (**permalink**) 02-03-2006, 12:17 AM

most of my local headies (if you don't know the correct measurment off the top of your head) will accept a traced-out circle from the slide end, and are always more than happy to help you find the size you're looking for. Just place your end on a peice of paper, and with a pencil trace a complete circle. Otherwise, if you have glass cleaner, clean the broken end and bring that in. Cheers -Kat

roxmysox99 · #3 (**permalink**) 02-03-2006, 12:19 AM

okay what do you mean. The bowl broke in 3 peices, the bowl broke in 2 and the stem broke in one so if i needa new bowl do i needa get a CERATIN size bowl for a bong or just get whatever??

GrowKat · #4 (**permalink**) 02-03-2006, 12:22 AM

the stem size is what matters, most are 9-16mm, so the part you insert into the bong you need to trace. What they'll do is just match it up to the slides they carry to find which size will fit your piece... the bigger the end the better, then your bong can take all that size and smaller :-)

roxmysox99 · #5 (**permalink**) 02-03-2006, 12:57 AM

Did i do this wrong?? I measured from where the stem starts to the end is 70 mm. Was i suppose to measure AROUND the stem?? Where do i measure AROUND the stem??

roxmysox99 · #6 (**permalink**) 02-03-2006, 01:02 AM

i also measured AROUND the stem and it comes out to 3.9 CM so 39 MM. But that is too big by what you said it should be.. What do i do??

GrowKat · #7 (**permalink**) 02-03-2006, 01:02 AM

round the circumferance of the stem... this illustration ought to help

roxmysox99 · #8 (**permalink**) 02-03-2006, 01:04 AM

i did that and it came to be 3.9 CM so 39 MM but that is too big because you said it is from 9-16 MM not 39 MM

roxmysox99 · #9 (**permalink**) 02-03-2006, 01:11 AM

What did i do wrong?? I measured around the stem of the bong and it is 39 MM which is TOO big because most are 9-16 MM what did i measure wrong??

psymonkey · #10 (**permalink**) 02-03-2006, 01:15 AM

man, unless it's glass on glass just go to the store and buy something that you think is tight and with not too big a stem.

roxmysox99 · #11 (**permalink**) 02-03-2006, 01:17 AM

i needa make sure though. It is NOT a glass on glass. It has a little O-Ring that makes the connection of the bowl to the down pipe airtight. But i am gonna go in 10 minutes to get one so tell me what i needa do?? What measurement do i needa take??

dr dro · #12 (**permalink**) 02-03-2006, 01:17 AM

did you measure the stems diameter?

roxmysox99 · #13 (**permalink**) 02-03-2006, 01:20 AM

no 39MM is the circumfrence so i need the diameter. Well the begining of the down pipe (after the big bowl part) is bigger than the end so do i measure the smallest part??

ziggyshugenadz · #14 (**permalink**) 02-03-2006, 01:21 AM

join the club!

roxmysox99 · #15 (**permalink**) 02-03-2006, 01:29 AM

Well the diameter Of The smallest part on my downstem is 12.5 MM in diameter so i gotta get one that is smaller than that right?? Okay Thanks alot and is there anything else i needa look for in a bowl??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When is a bowl cashed?	Duhka	Recreational Marijuana Use	15	11-15-2005 12:23 AM
Do you stir/turn/press down on the nugs in your bowl?	inhale	Recreational Marijuana Use	2	11-12-2005 09:46 PM
What to use for a bowl to a bong??	Rampede	Real Life Stories	6	10-16-2005 09:18 PM
What do you look for in a bowl?	Blueflame1986	Recreational Marijuana Use	15	09-26-2005 07:19 PM
AAAHHHH i broke the stem for my bong	overgrowray	General	10	07-23-2002 08:35 AM

Site links

FAQ

Important

Extra

#1 (permalink) 02-03-2006, 12:12 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	Broke My Zong Bowl!! Pisst Off Shit i was emptying ice outta my bong so i flipped it over to get the ice outta the ice catcher and i compltely forgot about the bowl and it fell onto the bathtub and shattered into 3 peices. One piece was half the bowl, the other half of the bowl was another peice and the last peice was the stem of the bowl. Shit now i gotta go 20-30 dollars in to get another one. Because my bowl is full of resin i cant take it to a head shop because they will be pisst the fuck off. So what do i have to measure on the broke bowl so i can get a new one?? FUCK I AM PISST Maleeh

#2 (permalink) 02-03-2006, 12:17 AM
GrowKat Registered User Join Date: Feb 2006 Posts: 14	most of my local headies (if you don't know the correct measurment off the top of your head) will accept a traced-out circle from the slide end, and are always more than happy to help you find the size you're looking for. Just place your end on a peice of paper, and with a pencil trace a complete circle. Otherwise, if you have glass cleaner, clean the broken end and bring that in. Cheers -Kat

#3 (permalink) 02-03-2006, 12:19 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	okay what do you mean. The bowl broke in 3 peices, the bowl broke in 2 and the stem broke in one so if i needa new bowl do i needa get a CERATIN size bowl for a bong or just get whatever??

#4 (permalink) 02-03-2006, 12:22 AM
GrowKat Registered User Join Date: Feb 2006 Posts: 14	the stem size is what matters, most are 9-16mm, so the part you insert into the bong you need to trace. What they'll do is just match it up to the slides they carry to find which size will fit your piece... the bigger the end the better, then your bong can take all that size and smaller :-)

#5 (permalink) 02-03-2006, 12:57 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	Did i do this wrong?? I measured from where the stem starts to the end is 70 mm. Was i suppose to measure AROUND the stem?? Where do i measure AROUND the stem??

#6 (permalink) 02-03-2006, 01:02 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	i also measured AROUND the stem and it comes out to 3.9 CM so 39 MM. But that is too big by what you said it should be.. What do i do??

#8 (permalink) 02-03-2006, 01:04 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	i did that and it came to be 3.9 CM so 39 MM but that is too big because you said it is from 9-16 MM not 39 MM

#9 (permalink) 02-03-2006, 01:11 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	What did i do wrong?? I measured around the stem of the bong and it is 39 MM which is TOO big because most are 9-16 MM what did i measure wrong??

#10 (permalink) 02-03-2006, 01:15 AM
psymonkey Registered User Join Date: Aug 2005 Location: College Station, TX Posts: 23	man, unless it's glass on glass just go to the store and buy something that you think is tight and with not too big a stem.

#11 (permalink) 02-03-2006, 01:17 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	i needa make sure though. It is NOT a glass on glass. It has a little O-Ring that makes the connection of the bowl to the down pipe airtight. But i am gonna go in 10 minutes to get one so tell me what i needa do?? What measurement do i needa take??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

#12 (permalink) 02-03-2006, 01:17 AM
dr dro Chillen. Join Date: Sep 2005 Location: NY Posts: 855	did you measure the stems diameter?

#13 (permalink) 02-03-2006, 01:20 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	no 39MM is the circumfrence so i need the diameter. Well the begining of the down pipe (after the big bowl part) is bigger than the end so do i measure the smallest part??

#15 (permalink) 02-03-2006, 01:29 AM
roxmysox99 Banned Join Date: Jan 2006 Posts: 78	Well the diameter Of The smallest part on my downstem is 12.5 MM in diameter so i gotta get one that is smaller than that right?? Okay Thanks alot and is there anything else i needa look for in a bowl??