Your complete guide to rolling a blunt.

Burzum · #1 (**permalink**) 09-02-2005, 08:11 AM

I'll get right to the point.

First, you get the dank because without it, it just really doesn't work.

Now that you have the dank, break that shit up nicely as follows.

Get your blunt. I usually cut the tip of the blunt BEFORE emptying it out. Wet the blunt along one side . I think all blunts do the job. I prefer GREEN Garcia Vega's but I gotta go deep in the ghetto to find Garcia's around here so any fresh blunt will do it for me if I don't have them.

A blade is handy at times like these.

Now there you have it. A blunt wrap. Wet the facing side of the wrap and fill it up with your dank EVENLY.

Next thing is to compress the weed with your thumbs applying even pressure throughout the whole process.

You can either roll the damn thing directly from right there ^. OR, follow this easier way which will also result in somewhat better looking blunts:

Cut the blunt wrap like you see in the picture and start rolling each side of the wrap just like you roll a regular joint.

And here's your blunt ready to be blazed the fuck up.

Enjoy. I'm blown the FUCK out cause I smoked that ^ before I started this thread.

WarezHaxor · #2 (**permalink**) 09-02-2005, 09:01 AM

Very informative, thanks for that, itll help me roll my blunts better

Burzum · #3 (**permalink**) 09-02-2005, 10:05 AM

no problem man. nothing better to do here at work

RuffRat · #4 (**permalink**) 09-02-2005, 12:46 PM

+rep for that post, very good!

.ViciouS. · #5 (**permalink**) 09-02-2005, 01:08 PM

Not too bad of a roll, nice pictures to go along with.

DiAmOnD RaStA · #6 (**permalink**) 09-02-2005, 03:46 PM

even though there are millions of "how to roll a blunt"

this one is 1 of the nicer ones i have seen. Not many people ever go with the seperation roll and their blunts always look like a slight FROWN (sad face) or pregneant in the middle.

Nice roll, what kinda blunt did u end up usin for that? +rep

daggakwagga · #7 (**permalink**) 09-02-2005, 04:34 PM

nice L dude, I like the little tear method too

bhoward3 · #8 (**permalink**) 09-02-2005, 04:36 PM

nice man the splitting works wonders

Third3ye · #9 (**permalink**) 09-02-2005, 11:09 PM

you did that at work?

SmokeDog20 · #10 (**permalink**) 09-02-2005, 11:17 PM

Mad props for this post...Really helpful and cant wait to try that tear method.

DankNugs · #11 (**permalink**) 09-03-2005, 02:54 AM

you have a hairy thumb.

oh ya, good thread and excellent directions

coltonwinieckie · #12 (**permalink**) 09-03-2005, 04:34 AM

i was always thinking about getting a cigar like that one and just eptying the shell and packing it but i figured the paper would be too thin to do that...good post though

budsmoka03 · #13 (**permalink**) 09-03-2005, 04:43 AM

nice blunt but it has too much paper, try a ciggarillol ess paper

BlitzedinBokey · #14 (**permalink**) 09-03-2005, 04:43 AM

Quote:

i was always thinking about getting a cigar like that one and just eptying the shell and packing it but i figured the paper would be too thin to do that...good post though

the paper is deffinitly not too thin...he used both the outer and inner layer of the cigar and didnt take out any of the "cancer papers" to roll his..nice roll and that dank looks similar to the nugs im smokin good shit...back to it being too thin...about 3 1/2 hours ago i rolled up .8 in just the outer layer of a wild apple white owl and prob kno how thin the outer layer is soo...i also trimmed it down alot to use the least amount of paper...i didnt taste the paper at all just crip and a lil wild apple

herbsman420 · #15 (**permalink**) 09-03-2005, 05:14 AM

Thanks bro. + Rep. And excellent roll by the way. I have never rolled an evenly burning blunt. Luckily my dealer will roll my shit for me (But I inspect the bud and watch him roll it). I will have to try the splitting method. Also, what kind of cigar did you use?

LinkBacks (?) LinkBack to this Thread: http://forum.grasscity.com/recreational-marijuana-use/68146-your-complete-guide-rolling-blunt.html
Posted By	For	Type	Date
realplayer4life's bookmarks on del.icio.us	This thread	Refback	04-15-2007 02:13 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rolling a blunt with syrup/honey	420420420	Recreational Marijuana Use	19	08-26-2005 06:23 PM
Blunt rolling..	ripcurl15	Recreational Marijuana Use	11	04-07-2005 11:29 PM
tips on blunt rolling?	MasterShake420	Recreational Marijuana Use	6	11-25-2004 03:27 PM
prefered blunt rolling method	blazed420	Recreational Marijuana Use	8	09-27-2004 04:07 AM
Blunts cant roll help! SOS	lacrossestar	Recreational Marijuana Use	10	05-27-2003 01:44 AM

Site links

FAQ

Important

Extra

#1 (permalink) 09-02-2005, 08:11 AM
Burzum Through smoke I forsee Join Date: Jun 2005 Posts: 281	Your complete guide to rolling a blunt. I'll get right to the point. First, you get the dank because without it, it just really doesn't work. Now that you have the dank, break that shit up nicely as follows. Get your blunt. I usually cut the tip of the blunt BEFORE emptying it out. Wet the blunt along one side . I think all blunts do the job. I prefer GREEN Garcia Vega's but I gotta go deep in the ghetto to find Garcia's around here so any fresh blunt will do it for me if I don't have them. A blade is handy at times like these. Now there you have it. A blunt wrap. Wet the facing side of the wrap and fill it up with your dank EVENLY. Next thing is to compress the weed with your thumbs applying even pressure throughout the whole process. You can either roll the damn thing directly from right there ^. OR, follow this easier way which will also result in somewhat better looking blunts: Cut the blunt wrap like you see in the picture and start rolling each side of the wrap just like you roll a regular joint. And here's your blunt ready to be blazed the fuck up. Enjoy. I'm blown the FUCK out cause I smoked that ^ before I started this thread.

#2 (permalink) 09-02-2005, 09:01 AM
WarezHaxor 56k Fury Join Date: Aug 2005 Location: New York(Canadian Border) Posts: 379	Very informative, thanks for that, itll help me roll my blunts better

#3 (permalink) 09-02-2005, 10:05 AM
Burzum Through smoke I forsee Join Date: Jun 2005 Posts: 281	no problem man. nothing better to do here at work

#5 (permalink) 09-02-2005, 01:08 PM
.ViciouS. I am not a concept Join Date: May 2003 Posts: 1,119	Not too bad of a roll, nice pictures to go along with. __________________ "Stay committed to your decisions, but stay flexible in your approach." - Tom Robbins My Sketchbook Anyone Reading Good Books?

#6 (permalink) 09-02-2005, 03:46 PM
DiAmOnD RaStA Multi-Talented Join Date: Apr 2005 Location: Down by the beach, boyyeee Posts: 4,857	even though there are millions of "how to roll a blunt" this one is 1 of the nicer ones i have seen. Not many people ever go with the seperation roll and their blunts always look like a slight FROWN (sad face) or pregneant in the middle. Nice roll, what kinda blunt did u end up usin for that? +rep __________________ The Stash Thread: http://forum.grasscity.com/pandoras-...errything.html Glass By: Medicali

#7 (permalink) 09-02-2005, 04:34 PM
daggakwagga Registered User Join Date: May 2004 Posts: 227	nice L dude, I like the little tear method too __________________ "We grew up too fast, falling apart, like the ashes of american flags."- Thursday " If I wasn't jamican then why would I wear this hat?"

#8 (permalink) 09-02-2005, 04:36 PM
bhoward3 Registered User Join Date: Feb 2005 Posts: 566	nice man the splitting works wonders

#9 (permalink) 09-02-2005, 11:09 PM
Third3ye Registered User Join Date: Dec 2004 Location: Mississippi, by the pot farm Posts: 179	you did that at work? __________________

#10 (permalink) 09-02-2005, 11:17 PM
SmokeDog20 Registered User Join Date: Jan 2005 Location: Tallahassee Posts: 20	Mad props for this post...Really helpful and cant wait to try that tear method.

#11 (permalink) 09-03-2005, 02:54 AM
DankNugs Registered User Join Date: Mar 2005 Location: Georgia Posts: 875	you have a hairy thumb. oh ya, good thread and excellent directions __________________ "Make the most of the Indian Hemp Seed and sow it everywhere." -George Washington "I’d always done a lot of (sniffing) glue as a kid. I was very interested in glue, and then I went to lager and speed, and I drifted into heroin because as a kid growing up everybody told me, ‘don’t smoke marijuana, it will kill you’ ..." -Irvine Walsh

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

#12 (permalink) 09-03-2005, 04:34 AM
coltonwinieckie Registered User Join Date: Jul 2005 Posts: 561	i was always thinking about getting a cigar like that one and just eptying the shell and packing it but i figured the paper would be too thin to do that...good post though __________________

#13 (permalink) 09-03-2005, 04:43 AM
budsmoka03 Registered User Join Date: Apr 2005 Posts: 26	nice blunt but it has too much paper, try a ciggarillol ess paper

#15 (permalink) 09-03-2005, 05:14 AM
herbsman420 Registered User Join Date: Jun 2005 Location: TX Posts: 771	Thanks bro. + Rep. And excellent roll by the way. I have never rolled an evenly burning blunt. Luckily my dealer will roll my shit for me (But I inspect the bud and watch him roll it). I will have to try the splitting method. Also, what kind of cigar did you use? __________________